mikrotik router vlan configuration

Most Relevant Content

  • MikroTik VLAN Routing Configuration with Manageable Switch

    A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as improves IT efficiency. So, it will be a better plan to implement VLAN in your network. If you have or manage MikroTik Router and manageable switch, VLAN implementation in your network is not so difficult. In this article, I will show how to easily configure inter-VLAN routing with MikroTik Router and manageable switch. Core Devices and IP Information To configure a VLAN network and inter-VLAN routing, I am using a MikroTik RouterBoard 1100 AHX2 (RouterOS v6.38.1) and Level One (GEP-2450) manageable switch. IP information that I am using for VLAN network configuration are given below. WAN IP 192.168.30.2/30 and Gateway IP 192.168.30.1 LAN networks: 10.10.20.0/24, 10.10.30.0/24 and 10.10.40.0/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just for my R&D purpose. [...]

    READ MORE »

  • More Similar Content

  • »

    VLAN Routing Configuration between MikroTik RouterOS |   September 27, 2018

    VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]

    READ MORE »

  • »

    How to Block MAC Address in MikroTik RouterOS 7 |   July 11, 2024

    MikroTik RouterOS 7 by default allows any MAC address to get internet connection through it. But we may need to block some MAC addresses sometimes. There are three methods to block MAC address in MikroTik RouterOS 7 – Blocking MAC Address using Bridge Filter Rule. Blocking MAC Address using Firewall Filter Rule and Blocking MAC Address from DHCP Lease. We can use any of these methods if we want to block MAC Address in MikroTik Router. In this article, we [...]

    READ MORE »

  • »

    Guest WiFi – How to Setup on MikroTik AP |   April 30, 2024

    Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]

    READ MORE »

  • »

    MikroTik Wireless AP Configuration with DHCP using Winbox |   October 22, 2019

    MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]

    READ MORE »

  • »

    MikroTik VLAN and Bridge Configuration |   September 19, 2017

    VLAN and Bridge are two useful features in MikroTik Router.  These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]

    READ MORE »

  • You May Also Like

  • »

    FreeRADIUS Installation and Basic Configuration on CentOS 7 |   November 28, 2018

    FreeRADIUS is a modular, high performance and highly customizable open source RADIUS server. Anyone can use FreeRADIUS without any charge and can customize his RADIUS server according to his organizational requirements. In my previous article, I discussed how to install and configure user manager RADIUS server developed by MikroTik. The main disadvantage of user manager RADIUS server is ‘it is not customizable and not suitable for medium or large organization’. On the other hand, FreeRADIUS is giving facility to customize [...]

    READ MORE »

  • »

    MikroTik HotSpot One to One NAT/Universal HotSpot NAT |   September 27, 2020

    MikroTik Hotspot is an awesome service that can be customized widely. When MikroTik Hotspot is enabled on an interface, it adds dynamic destination NAT rules which will redirect all HTTP and HTTPS requests from unauthorized users to the Hotspot authentication proxy. So, no user can get internet access in Hotspot network without authentication. MikroTik Hotspot also uses one to one NAT providing an IP address from selected IP Pool and this IP address handles user’s data and limitation. Sometimes we [...]

    READ MORE »

  • »

    MikroTik Bandwidth and Resource Monitoring with Graphs |   January 31, 2018

    “Am I getting my committed bandwidth?” is a common question to any network administrator. This question may arise either from your customer or from your owner if you are an employee of any organization. If you feel boring hearing this question and want to establish a system where your customer will be able to inspect his bandwidth usage, MikroTik Graphing is your best friend. MikroTik Graphing can be used to display graphics for traffic which is passed through interfaces and [...]

    READ MORE »

  • »

    How to Block Tor Browser with MikroTik Router |   June 12, 2019

    Tor Browser is an alternative to VPN and Web Proxy that breaks blocking firewall rule. If any user installs and uses Tor Browser, he/she can hide the public IP address of router and can unblock blocked websites applied on a network. So, administrators should block Tor Nodes along with other blocking firewall rule. In my previous article, I discussed how to block VPN and Proxy access with MikroTik Router and in this article I will discuss how to block Tor [...]

    READ MORE »