mikrotik vpn l2tp/ipsec
Most Relevant Content
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client)
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. The goal of this article is to connect a remote client operating system using [...]
- »
MikroTik Site to Site VPN with L2TP/IPsec | March 3, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than [...]
- »
MikroTik VRRP Configuration with Load Sharing | November 19, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
How to Prevent Simultaneous User Login in MikroTik Hotspot | November 10, 2020
MikroTik Hotspot is a user based internet access system. Most of the user authentication and authorization can be controlled with MikroTik Hotspot. But sometimes some users misuse user based authentication system. Misusing simultaneous login is one of them. Usually we provide one username and password for a user and we expect he/she will use this username and password from only one device at a time. But it is also possible to use same username and password in multiple devices at [...]
- »
MikroTik DHCP Server Configuration in RouterOS 7 | October 14, 2015
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol. DHCP server automatically provides an Internet Protocol (IP) address and other related information such as subnet mask, default gateway and DNS to DHCP clients. DHCP server and client use UDP port 67 and 68 for communication. In a network, a DHCP client (IP devices such as Desktop, Laptop, Smartphone etc.) requests for an IP lease to DHCP servers and a DHCP server responses allocating IP address and other related IP information [...]
- »
CentOS 8 Networking Configuration Using nmtui Tool | December 14, 2020
The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]
- »
CentOS 7.5 Installation Step by Step with GUI (GNOME Desktop) | August 15, 2018
Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Red Hat Linux is used as enterprise Linux. Red Hat is also known as Red Hat commercial Linux that means Red Hat is a paid service program. CentOS (Community Enterprise Operating System) is another Linux distribution that provides a free and open source, enterprise-class, community-supported server platform functionally compatible with [...]
- »
MikroTik Hotspot Customized Login Template | April 14, 2022
MikroTik Hotspot is a popular service which is used to manage ISP, Hotel, Restaurant, Airport, and Public WiFi. Using billing application like GalaxyRAD with MikroTik Hotspot, a WiFi network can manage professionally. MikroTik Hotspot loads a login page for new user authentication. So, this login page is a vital source for promoting your brands. The default login template provided by MikroTik Hotspot is a simple template which cannot fulfill branding requirements. But it is possible to customize the login template [...]
- »
MikroTik Radius Configuration with FreeRADIUS and MySQL | December 18, 2018
FreeRADIUS is a modular RADIUS suite. A lot of modules such as Perl, python, MySQL etc. can be integrated with freeRADIUS to enrich freeRADIUS features. MySQL is one of the best user and client sources in freeRADIUS server. One of the important advantages of MySQL with freeRADIUS server is that MySQL can easily be controlled with a lot of programming languages including PHP. So, freeRADIUS users and their authentication, authorization and accounting can easily be controlled graphically using MySQL database [...]
- »
How to Block a Phone from WiFi Router | May 8, 2024
We usually buy a WiFi Router from market and configure SSID and password to access it. We also configure DHCP Server so that whenever a phone or IP device gets connected to this SSID with the password, the device can get an IP address automatically and can get internet access. It is not possible to secure the WiFi Network keeping only the password authentication method. Because the password can be shared by the users or can be hacked easily. So, [...]
More Similar Content
You May Also Like
