mikrotik vrrp and load sharing

Most Relevant Content

  • MikroTik VRRP Configuration with Load Sharing

    MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back again.  In the previous article, I discussed the basic MikroTik VRRP configuration to establish a high available internet network. But in basic configuration, the backup router keeps completely idle during Backup state and this behavior may be considered as waste of valuable resources. In MikroTik VRRP, it is possible to set backup router as a gateway for some clients and this method is known as load-sharing scheme. In this article, I will discuss how to configure MikroTik VRRP with Load Sharing scheme. Network Diagram To configure MikroTik VRRP with Load Sharing scheme, I am following a network diagram like the below image. In this network, two MikroTik RouterOS (R1_RouterOS and R2_RouterOS) are member of a MikroTik VRRP with load sharing [...]

    READ MORE »

  • You May Also Like

  • »

    CentOS 7 Partition Management with fdisk Utility |   February 11, 2019

    CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]

    READ MORE »

  • »

    How to Create Free SSL/TLS Certificate with OpenSSL |   July 23, 2021

    SSL/TLS certificate is required to encrypt data sent over internet communication. Without encryption, the sent data can be hacked by the middle man attack. SSL/TLS certificate is usually a pair key, public key and private key, solution where data is encrypted with public key and decrypted with private key. In public communication, public key is required to be signed by a CA (certificate authority) but in private communication, there is no need to be signed by any CA. If we [...]

    READ MORE »

  • »

    How to Secure MikroTik RouterOS Login Users |   February 19, 2021

    MikroTik RouterOS is a bridge between WAN and LAN. So, it is mandatory to apply RouterOS login user security policy. Otherwise, RouterOS may so insecure.

    READ MORE »

  • »

    MikroTik Configuration with DHCP WAN Connection |   March 24, 2019

    MikroTik Router is one of the most popular routers because of having a lot of networking features. MikroTik DHCP Client is a special feature that is used to connect to any DHCP Server. So, if any uplink ISP provides DHCP connection, MikroTik Router is able to connect that DHCP Server using this DHCP Client. In my previous article, I discussed how to configure MikroTik Router with PPPoE WAN Connection. In this article, I will discuss how to configure MikroTik Router [...]

    READ MORE »

  • »

    MikroTik Radius Configuration with FreeRADIUS |   December 7, 2018

    FreeRADIUS is a high performance RADIUS suite that provides authentication, authorization and accounting facility for a large number of network devices including MikroTik Router. Although MikroTik has user manager RADIUS service to provide authentication, authorization and accounting facility but it is not free for customization and not suitable for medium to large organization. On the other hand, freeRADIUS is free for customization according to your organization requirements. But freeRADIUS has to be customized by you. In my previous article, I [...]

    READ MORE »

  • »

    MikroTik Hotspot HTTPS Redirect and HTTPS Login Setup |   May 24, 2020

    MikroTik Hotspot is one of the most popular services in MikroTik Router. It is a policy to authorize network clients before to access local network resources as well as public network resources through MikroTik Router. In my previous article I discussed MikroTik Hotspot Configuration using Winbox. But default MikroTik Hotspot configuration faces HTTPS Redirect and HTTPS Login issues. To solve these issues, MikroTik Hotspot HTTPS configuration is required. So, in this article I will discuss how to configure MikroTik Hotspot [...]

    READ MORE »

  • »

    WiFi Station Setup in MikroTik Wireless Router |   November 27, 2019

    MikroTik Wireless Router is capable of working as a WiFi Client.  So, if any ISP provides WiFi connection for their clients, MikroTik Wireless Router can be used to connect to that ISP SSID by configuring wireless station mode. MikroTik WiFi station mode finds available SSID and connects with permitted SSID.  This wireless connection can be used as wireless WAN connection and configuring LAN, multiple devices can get internet over this wireless WAN connection. In my previous article, I discussed how [...]

    READ MORE »

  • »

    LVM Management in CentOS/Red Hat 7 Linux |   March 15, 2019

    LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]

    READ MORE »

  • »

    DHCP Server Configuration in MikroTik RouterOS 7 |   October 14, 2015

    Dynamic Host Configuration Protocol (DHCP) is a client/server protocol. DHCP server automatically provides an Internet Protocol (IP) address and other related information such as subnet mask, default gateway and DNS to DHCP clients. DHCP server and client use UDP port 67 and 68 for communication. In a network, a DHCP client (IP devices such as Desktop, Laptop, Smartphone etc.) requests for an IP lease to DHCP servers and a DHCP server responses allocating IP address and other related IP information [...]

    READ MORE »