mikrotik webfig
Most Relevant Content
MikroTik Router First Time Startup and Setup using WebFig
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods to startup and configure a new MikroTik Router. MikroTik First Time Startup and Configuration using Winbox: Winbox configuration utility is able to connect to the MikroTik Router via MAC address or IP address. Winbox is a graphical utility. So, it can be helpful for a new MikroTik user as well as for those users who like to configure RouterOS with Graphical Window. MikroTik First Time Startup and Configuration using WebFig: WebFig is a web configuration utility for MikroTik Router. Those who like to configure MikroTik Router with web Interface can use WebFig utility. It has almost the same configuration functionality as Winbox. MikroTik First Time Startup and Configuration using CLI: Command Line Interface (CLI) utility gives facility to configure MikroTik [...]
- »
MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup | November 4, 2025
MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]
- »
PPPoE Server Configuration in MikroTik RouterOS 7 | December 2, 2023
MikroTik PPPoE is a client-server protocol and mostly used at the end ISP configuration where MikroTik RouterOS acts as a PPPoE Server and user’s WiFi Router acts as PPPoE client. MikroTik PPPoE Server can be used with MikroTik simple queue management. So, it helps to manage user’s bandwidth easily. People who are trying to do internet business should learn MikroTik PPPoE Server. Configuring PPPoE Server in MikroTik RouterOS 7 is so easy. If you have knowledge on basic RouterOS 7 [...]
- »
MikroTik Backup and Restore Configuration using Winbox | July 31, 2018
Backup and Restore feature in MikroTik Router helps to recover router configuration when running router fails to operation due to hardware failure. If you have a backup copy of your failed router and purchase a new MikroTik Router and then upload and restore that backup file, you will get your running network without any hassle. MikroTik Backup file is also useful when you unfortunately forget your admin privilege user password. You can easily recover your forgotten password with backup file [...]
- »
How to Bind Hotspot User to MAC and Static IP in MikroTik | November 6, 2020
MikroTik Hotspot is usually a user based Hotspot access controlling system. Internet access and bandwidth can easily be maintained with Hotspot user based system. But sometimes we may require more control on Hotspot system which is not possible only username based system. So, we may need to bind hotspot user to MAC and static IP address. If we can bind hotspot user to static IP address, it is easy to control Hotspot users with MikroTik Router and Firewall. So, in [...]
- »
Enable F8 Menu to Enter Safe Mode in Windows 8 & 10 | August 27, 2015
Windows is the most popular operating system in the world. No computer user can go a single day without windows operating system. As windows is a popular operating system, it has a lot of viruses also. But windows provides various tools for removing these viruses. For removing any unwanted program, windows safe mode is a best option. A popular way to open windows safe mode is windows Advanced Boot Options. Advanced Boot Options provides different run levels for windows users so [...]
- »
MikroTik Site to Site VPN with L2TP/IPsec | March 3, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than [...]
- »
How to Install MikroTik CHR on VMware Workstation | September 9, 2019
MikroTik is found both RouterBoard where RouterOS and License are prebuilt and RouterOS Application that can be installed on a Physical Machine or Virtual Machine. RouterOS installation on Physical or Virtual Machine has license limitations. Full RouterOS packages cannot be used more than 24 hours without license. So, RouterOS application is not suitable for the Trainee or not suitable to RND purpose. From RouterOS v6.34, MikroTik introduces Cloud Hosted Router (CHR, a new RouterOS version) which has different licensing scheme. [...]
- »
Ubuntu Server 20.04 Installation with LVM | May 28, 2021
Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Ubuntu is one of the best stable Linux distributions. Ubuntu has both Desktop and Server distribution. Ubuntu Server is a high performance and stable enterprise Linux distribution and it can be easily used in production. Ubuntu Server has both community-support and well documentation. So, IT guys can use Ubuntu [...]
- »
Ubuntu Server Set Static IP Address with Netplan | July 1, 2021
Ubuntu Server is one of the most popular open source sever operating systems. Ubuntu Server can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server’s latest version (Ubuntu Server 20.04) with LVM. In this article, we are going to see how to assign static IP address in Ubuntu Server with Netplan network management tool. Netplan Since Ubuntu Server 17.10, Netplan is being used as the default network management tool instead of [...]
More Similar Content
You May Also Like
