pppoe load balancing
Most Relevant Content
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE WAN connection is a little bit complex than static WAN connection. Some of my loyal readers also ask me to make a tutorial on Load Balancing with PPPoE Client. So, in this article I will discuss how to configure Load Balancing with Failover over two PPPoE WAN connections and one static WAN connection in MikroTik Router. Network Diagram We will configure Multi WAN load balancing using ECMP method according to the following network diagram. In this network, MikroTik Router’s ether1 port is connected to ISP1 with PPPoE WAN connection (username: wan1 and Password: wan1) and ether2 port is connected to ISP2 with PPPoE WAN connection (username: wan2 and Password: wan2) and ether3 port is connected ISP3 with IP block 172.25.25.0/30 [...]
- »
MikroTik Dual WAN PCC Load Balancing with PPPoE Server | July 5, 2018
Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]
- »
MikroTik Router First Time Startup and Setup using WebFig | April 17, 2018
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]
- »
Mikrotik Router Basic Configuration Using Winbox | August 24, 2015
MikroTik is one of the most popular routers. MikroTik Router has a lot of networking services that help to build a stable and smooth network so easily. It is said that any ISP Company or any Enterprise Office cannot go a single day without MikroTik Router. So, system administrators who are not using MikroTik Router yet, they will soon start using MikroTik Router, I think. As a system administrator, I am also using MikroTik Router about 5 years in my network [...]
- »
How to Bind Hotspot User to MAC and Static IP in MikroTik | November 6, 2020
MikroTik Hotspot is usually a user based Hotspot access controlling system. Internet access and bandwidth can easily be maintained with Hotspot user based system. But sometimes we may require more control on Hotspot system which is not possible only username based system. So, we may need to bind hotspot user to MAC and static IP address. If we can bind hotspot user to static IP address, it is easy to control Hotspot users with MikroTik Router and Firewall. So, in [...]
- »
How to Separate MikroTik Hotspot and DHCP IP Pool | October 9, 2020
MikroTik default Hotspot Setup comes with a DHCP Server (which uses same IP Pool of Hotspot Server) to provide IP address and other network information to a connected device. Using this automatic IP address connected device can access Hotspot login page. After successfully login, a one to one NAT IP address is also assigned for the device and this process happens internally in Hotspot Server. User device cannot know this one to one NAT IP assigning. However, Hotspot Server actually [...]
- »
Download YouTube Video with Firefox Add-ons | August 26, 2015
YouTube is the most popular video sharing website. Statistics shows that YouTube is the second popular website of the world. So, it is nothing to say that you are a YouTube fan like me. As a YouTube fan, sometimes you may need to download YouTube videos which you like. Although, you often get an extra bandwidth for YouTube video streaming from your ISP now a days so that you can watch your favorite YouTube video without any buffering. But it [...]
- »
7 Best WiFi Router Brands For Home Or Apartment | September 18, 2021
So, you are deciding to buy a WiFi Router for your home or apartment and finding which brand will be the best WiFi Router for your home. A lot of brands which manufacture WiFi Router for home usage are available nowadays in the market but all brands are not renowned and don’t provide best performance for home usage. So, before going to buy a WiFi Router, you should have better understanding about Best WiFi Router Brand that provides best WiFi [...]
- »
How to Get VMware ESXi Free License | November 5, 2021
You are here that means you are finding how to get ESXi free license because you have installed ESXi 6.7 or ESXi 7 and 60 days trial license has been expired and then all virtual machines have been powered off or you want to use VMware ESXi absolutely free of charge. Whatever your requirement, it is a good news that VMware provides free license with some limitations to use VMware ESXi absolutely free of charge. So, if you have a [...]
- »
MikroTik RADIUS Server Setup with User Manager – RouterOS7 | August 4, 2022
MikroTik User Manager RADIUS Server is an awesome service for user Authentication, Authorization and Accounting (AAA) for a small or medium business. User Manager RADIUS Server can be used to maintain Hotspot, PPP, DHCP, IPsec, Wireless and System User authentication. In RouterOS 7, User Manager has come with new features and looking, specially, maintaining from Winbox. As User Mange package does not come with the default system package in RouterOS 7, we have to install User Manger package manually before [...]
More Similar Content
You May Also Like
