proxy server blocking by port
Most Relevant Content
How to Block Free Proxy Access with MikroTik Router
Proxy Server is an alternative to VPN that breaks blocking firewall of a network. If any user uses free web proxy server with web browser, the web request is processed by the proxy server. So, blocking firewall rule is not applied on the proxy enabled PC. For this, system administrators should be careful enough to block free proxy servers along with blocking VPN access. In my previous article, I discussed how to block VPN access with MikroTik Firewall. In this article, I will discuss simple tricks to block free web proxy access with MikroTik Router. Tricks to Block Web Proxy Server The default proxy server port is 3128 but 8080 port is also popularly used for proxy request. So, if we block 3128 and 8080 ports, 80% of free web proxy server can be blocked. As the proxy port can be changed as the system admin wish, some system admins use other free ports also, even 80 port. In this case, system admin can find the IP address of the popular proxy servers by searching online and block them manually. With these two methods, it is possible to block 99% of the free web proxy access. Method 1: Blocking Free [...]
- »
MikroTik Router Web Proxy Configuration | August 28, 2016
A Proxy Server is usually placed between users and the internet so that the proxy server can track the activities of any user. Formerly, a proxy server was mainly used for caching the static content of any web server because the internet speed was too slow. So, users would get high speed for browsing as if they were browsing a local server. But nowadays the internet bandwidth has increased. So, the proxy server is usually not used for web caching [...]
- »
NGINX and PHP-FPM: A High-Performance Web Hosting Duo | September 26, 2024
When it comes to hosting high-performance websites or web applications, Nginx and PHP-FPM are often paired together due to their complementary capabilities. NGINX is a highly efficient web server which works seamlessly with PHP-FPM. PHP-FPM is a FastCGI Process Manager for PHP that is used to deliver fast, reliable, and scalable solutions for dynamic content. What is Nginx? Nginx (pronounced as “engine-ex”) is a lightweight, high-performance web server that is widely used for serving static content, load balancing and reverse [...]
- »
How to Prevent Simultaneous User Login in MikroTik Hotspot | November 10, 2020
MikroTik Hotspot is a user based internet access system. Most of the user authentication and authorization can be controlled with MikroTik Hotspot. But sometimes some users misuse user based authentication system. Misusing simultaneous login is one of them. Usually we provide one username and password for a user and we expect he/she will use this username and password from only one device at a time. But it is also possible to use same username and password in multiple devices at [...]
- »
MikroTik Hotspot Configuration with ECMP Load Balancing | September 4, 2021
MikroTik Hotspot is one of the most popular services in MikroTik RouterOS and day be day the demand of Hotspot service is increasing. MikroTik Hotspot can be used in any Airport, Hotel, Restaurant, Campus, Camp, Office or any ISP network. It is also possible to establish a WiFi Broadband Network with the MikroTik Hotspot service. How to configure MikroTik Hotspot was discussed in one of my previous articles. Although MikroTik Hotspot configuration is not so difficult but sometimes we face [...]
- »
How to Secure MikroTik RouterOS Login Users | February 19, 2021
MikroTik RouterOS is a bridge between WAN and LAN. So, it is mandatory to apply RouterOS login user security policy. Otherwise, RouterOS may so insecure.
- »
VMware ESXi 7.0 Installation and Basic Configuration | December 1, 2020
VMware vSphere is the pioneer in virtualization world. No other virtualization software is as feature rich as VMware vSphere. More than 500,000 enterprise data center are now using VMware vSphere. It is expected that most of the data center will be turned into virtualization in near future. As VMware vSphere provides more feature than any other virtualization software, it is also expected that demand of VMware vSphere will increase day by day. VMware ESXi is the foundation of VMware vSphere [...]
- »
How to Separate MikroTik Hotspot and DHCP IP Pool | October 9, 2020
MikroTik default Hotspot Setup comes with a DHCP Server (which uses same IP Pool of Hotspot Server) to provide IP address and other network information to a connected device. Using this automatic IP address connected device can access Hotspot login page. After successfully login, a one to one NAT IP address is also assigned for the device and this process happens internally in Hotspot Server. User device cannot know this one to one NAT IP assigning. However, Hotspot Server actually [...]
- »
How to Block Tor Browser with MikroTik Router | June 12, 2019
Tor Browser is an alternative to VPN and Web Proxy that breaks blocking firewall rule. If any user installs and uses Tor Browser, he/she can hide the public IP address of router and can unblock blocked websites applied on a network. So, administrators should block Tor Nodes along with other blocking firewall rule. In my previous article, I discussed how to block VPN and Proxy access with MikroTik Router and in this article I will discuss how to block Tor [...]
- »
Static Routing Configuration in MikroTik Router | February 11, 2018
Static Routing is an important topic to any network administrator who works with multiple MikroTik RouterOS and wants to establish communication among Router’s local networks. For example, say a network administrator maintains two MikroTik RouterOS connected with any communication medium and each RouterOS has its own networks and network resources such as servers, printers etc. and he wants that each network and network resources will be accessible from other networks. In this case, static routing configuration between two RouterOS will [...]
More Similar Content
You May Also Like
