setting vlan mikrotik
Most Relevant Content
MikroTik VLAN and Bridge Configuration
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on multiple physical interfaces. As VLAN and Bridge are useful to any MikroTik network, this article is designed to show the necessary steps to configure VLAN and Bridge in MikroTik Router. VLAN in MikroTik VLAN (Virtual Local Area Network) is used to create multiple virtual LANs on a single physical interface. It is a layer 2 method that divides a single broadcast domain into multiple broadcast domains. So, proper VLAN planning can increase your network performance as well as network privacy. There are various situations when you need to create VLAN in your MikroTik router. For example, if your ISP provides your WAN connection through a VLAN, you have to create a VLAN on your WAN interface or if you need [...]
- »
Troubleshooting Common Issues with Security Cameras in MikroTik Networks | February 7, 2025
30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]
- »
MikroTik Wireless AP Configuration with DHCP using Winbox | October 22, 2019
MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]
- »
MikroTik Hotspot HTTPS Redirect with Free SSL Certificate | June 21, 2020
SSL Certificate is required to enable HTTPS Login and HTTPS Redirect in MikroTik Hotspot. In one of my last articles I discussed how to configure MikroTik Hotspot HTTPS redirect and HTTPS login with MikroTik self-signed certificate. But self-signed certificate is not trusted by operating system. So, we get the following two issues if we configure HTTPS Login and HTTPS Redirect with self-signed certificate. Ask to proceed unsafe site: As browsers cannot trust self-signed certificate, it shows a warning message and [...]
- »
MikroTik Hotspot with Bandwidth Limitation and Prepaid Billing System | January 14, 2018
Say, you are a network administrator and want to establish a network that will have user bandwidth package management facility with prepaid billing system as well as partner advertisement facility. Then, MikroTik Hotspot Server Configuration with MikroTik User Manager Radius Server will be a wise decision. Because, MikroTik User Manager Radius Server is a user authentication, authorization and accounting application that will give facility to manage user bandwidth package with prepaid billing system. On the other hand, you can easily [...]
- »
CentOS 7 Network Configuration Using nmtui Tool | August 27, 2018
After completing CentOS 7 fresh installation, the first task to a system administrator is to configure its network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7.5 GUI (GNOME Desktop) step by step. If you are a new CentOS 7 user and yet you have not installed CentOS 7.5 on your server machine, feel free to study my previous article and install CentOS 7.5 GNOME Desktop according to that [...]
- »
MikroTik Router Static DHCP Server Configuration | October 25, 2015
DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and [...]
- »
FreeRADIUS User Profile Configuration for MikroTik Router | January 10, 2019
FreeRADIUS is a high performance RADIUS application that accepts a large number of network devices as RADIUS Client including MikroTik Router. FreeRADIUS MySQL module helps to get user authentication and authorization information from database server and to store user accounting information in database server. Configuring MySQL user group and profile properly, freeRADIUS user restriction can easily be maintained. How to configure user group to apply user limitation was discussed in my previous article. In this article, I will discuss how [...]
- »
Install MikroTik RouterOS on PC | June 13, 2016
MikroTik is a popular and mostly used router worldwide because of having a lot of networking functionalities and its cheap price. If we buy a MikroTik Routerboard (like MikroTik Routerboard 450G, MikroTik Routerboard 1100 AH etc.), we will find a machine where MikroTik RouterOS is prebuilt but the machine contains limited processing resources such as limited RAM and limited processor core. So, our network could be slow if you use a MikroTik RouterBoard for maintaining a large network. On the [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
More Similar Content
You May Also Like
