star network topology

Most Relevant Content

  • Computer Network Topology Outline

    The first thing that has to study about a network is its physical shape or design layout. It will be extremely important when a wiring scheme and design are selected for a new network installation. Actually Network Topology refers to physical shape or design layout of a network. Network topology determines how different nodes in a network are connected and how these nodes communicate to each other. Types of Computer Network Topology Network really has two shapes or two types of topology. Physical topology Logical topology Physical Topologies The physical topology is the physical shape or layout of the wires that can be visible in a network. The Physical topology defines how devices are interconnected with or without wires. Physical topology is further divided into two sections. Point-to-point connections Multipoint connections  Point-to-point connections In a point-to-point connection, a communication link is established between two devices with one wire or air (in the case of wireless). A simple example of point-to- point connection is talking over telephone between two persons where anyone else is not allowed to use the phone on either side. Multipoint Connection Multiple devices or machines are involved in a multipoint connection. These devices mainly share cabling but [...]

    READ MORE »

  • More Similar Content

  • »

    GNS3 Installation and Configuration Step by Step in Windows |   September 14, 2018

    GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]

    READ MORE »

  • »

    MikroTik VLAN Routing Configuration with Manageable Switch |   July 11, 2018

    A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]

    READ MORE »

  • You May Also Like

  • »

    MikroTik User Manager RADIUS Installation on RouterOS 7 |   July 5, 2022

    The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]

    READ MORE »

  • »

    How to Assign Static IP Address in Windows OS |   September 16, 2015

    Communication between one computer to another computer or server is established with IP addresses. Without IP address no communication is possible in computer network. An Internet Protocol (IP) Address is a numerical value or label assigned to each electronic device (e.g., computer, smartphone and printer) which uses Internet Protocol for communication. IP can be assigned both dynamically and statically on a IP devices. Dynamic IP is assigned by a DHCP server. If a DHCP server is present in a network, [...]

    READ MORE »

  • »

    MikroTik Hotspot Auto Login by MAC Address |   July 1, 2020

    Hotspot is an awesome service in MikroTik Router. MikroTik Hotspot is popularly used in ISP, Hotel, Airport, Coffee Shop, Enterprise office and many other organizations. By default MikroTik Hotspot uses HTTP CHAP login method where user must provide username and password to get internet service. Sometimes we may face that some users are not eager to provide username and password to get internet service or we cannot ask some users to put username and password to get internet due to [...]

    READ MORE »

  • »

    Managing Disk Partition with the parted Tool in CentOS 7 |   March 2, 2019

    As a system administrator, sometimes you may require to manage partitions of your CentOS/Red Hat Linux Operating System. Partition management is always a risky task. But there are some useful tools those are so helpful to manage CentOS/Red Hat Linux disk partition easily. In my previous article, I discussed how to manage CentOS/Red Hat 7 HDD partitions with the fdisk utility. The fdisk tool is only eligible to manage MBR partition table. But GPT partition table is now becoming more [...]

    READ MORE »

  • »

    MikroTik Site to Site SSTP VPN Setup with RouterOS Client |   May 14, 2020

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]

    READ MORE »

  • »

    MikroTik VLAN and Bridge Configuration |   September 19, 2017

    VLAN and Bridge are two useful features in MikroTik Router.  These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]

    READ MORE »

  • »

    MikroTik Hotspot Configuration with ECMP Load Balancing |   September 4, 2021

    MikroTik Hotspot is one of the most popular services in MikroTik RouterOS and day be day the demand of Hotspot service is increasing. MikroTik Hotspot can be used in any Airport, Hotel, Restaurant, Campus, Camp, Office or any ISP network. It is also possible to establish a WiFi Broadband Network with the MikroTik Hotspot service. How to configure MikroTik Hotspot was discussed in one of my previous articles. Although MikroTik Hotspot configuration is not so difficult but sometimes we face [...]

    READ MORE »