use old router as access point
Most Relevant Content
How to Use Old Router as Range Extender to Boost WiFi Signal
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender device use old wifi router as range extender mode to boost Wifi signal. The easy method to boost Wi-fi signal coverage without using a range extender device is make wifi router as repeater mode which will extend signal. This post will help you turn old router as a range extender mode to improve wireless signals in the low signal areas. Setup WiFi Router as Range extender Mode To use the router as repeater mode need to access the settings page. To access the router login page use default IP Address router or Make factory reset if forget IP address. Connect Router LAN port to Desktop or Laptop LAN port. Use Static IP Address of the same series in LAN settings [...]
- »
How to Buy a Good WiFi Router for Home or Office | October 12, 2021
You are here because you want to buy a WiFi Router and want to know how to buy a good WiFi Router for your home or office or business. A lot of wireless routers are nowadays available in the market. But before buying a WiFi Router, you should know which one is a good WiFi Router for your need based on some features and specifications of the router. We will now see some key points those should have well understand [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
MikroTik OpenVPN Setup with Windows Client | April 2, 2018
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across [...]
- »
How to Install MikroTik CHR on VMware Workstation | September 9, 2019
MikroTik is found both RouterBoard where RouterOS and License are prebuilt and RouterOS Application that can be installed on a Physical Machine or Virtual Machine. RouterOS installation on Physical or Virtual Machine has license limitations. Full RouterOS packages cannot be used more than 24 hours without license. So, RouterOS application is not suitable for the Trainee or not suitable to RND purpose. From RouterOS v6.34, MikroTik introduces Cloud Hosted Router (CHR, a new RouterOS version) which has different licensing scheme. [...]
- »
MikroTik PPPoE Server Configuration with freeRADIUS Server | January 20, 2019
PPPoE Service is one of the most popular services in MikroTik Router. It is specially used by the local ISP provider for the simplicity of client connection. MikroTik PPPoE Service accepts user or client authentication and authorization both MikroTik local user database and RADIUS user database. RADIUS Server provides an efficient way to manage user authentication, authorization and accounting. FreeRADIUS is a high performance RADIUS suite that provides user authentication, authorization and accounting facility for a number of network devices [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik DNS Client and Caching DNS Server Configuration | April 7, 2019
Domain Name Server (DNS) is an essential part in a computer network. Today web communication cannot imagine without DNS. DNS is a client server protocol where DNS Client requests for the domain name resolution and DNS Server response on it. MikroTik Router has both DNS Client and DNS Server features. The DNS Client is used to resolve domain name to IP address from a DNS Server. On the other hand, the DNS Server feature provides domain name resolution for the [...]
- »
WireGuard Site to Site VPN Between MikroTik RouterOS 7 | September 29, 2022
WireGuard is a free, open source, secure and high-speed modern VPN solution. WireGuard is extremely easy to implement but utilizes state-of-the-art cryptography. WireGuard can be used as either Client-Server VPN technology or Site to Site VPN technology. From the RouterOS 7, MikroTik introduces WireGuard VPN as their native package. So, who are using RouterOS 7 can use WireGuard VPN and can implement both client-server and site to site VPN with WireGuard free VPN server. In my previous article, I discussed [...]
- »
MikroTik CAPsMAN and CAP Basic Configuration using Winbox | February 20, 2020
MikroTik CAPsMAN (Controlled Access Point system Manager) is a centralized Access Point management application provided by MikroTik. MikroTik introduces CAPsMAN from RouterOS v6.11 with CAPsMAN v1 and from RouterOS v6.22rc7 CAPsMAN v2 is running. If you have multiple MikroTik CAPs (Controlled Access Point) in your organization, CAPsMAN provides an easy way to maintain client data as well as CAPs configuration centrally. In my previous article, I discussed how to configure MikroTik Wireless Router as an Access Point. In this article, [...]
More Similar Content
You May Also Like
