windows 7 static ip setup

Most Relevant Content

  • How to Assign Static IP Address in Windows OS

    Communication between one computer to another computer or server is established with IP addresses. Without IP address no communication is possible in computer network. An Internet Protocol (IP) Address is a numerical value or label assigned to each electronic device (e.g., computer, smartphone and printer) which uses Internet Protocol for communication. IP can be assigned both dynamically and statically on a IP devices. Dynamic IP is assigned by a DHCP server. If a DHCP server is present in a network, an IP is assigned just connecting Ethernet cable in Ethernet port or providing security key for wireless connection. But static IP must be assigned on network adapter manually to participate in a network. So, it will be beneficial for you to know how to assign static IP address on a windows operating system. Keep reading this article to know how to assign a static IP address manually on a network adapter in  windows 7, windows 8 or windows 10 operating system. IP Information for Assigning IP Address For assigning static IP address in windows operating system successfully, you should have not only IP Address but also Subnet Mask, Default Gateway and DNS IP information. Normally, your ISP (Internet Service Provider) will provide [...]

    READ MORE »

  • More Similar Content

  • »

    WireGuard Site to Site VPN Between MikroTik RouterOS 7 |   September 29, 2022

    WireGuard is a free, open source, secure and high-speed modern VPN solution. WireGuard is extremely easy to implement but utilizes state-of-the-art cryptography. WireGuard can be used as either Client-Server VPN technology or Site to Site VPN technology. From the RouterOS 7, MikroTik introduces WireGuard VPN as their native package. So, who are using RouterOS 7 can use WireGuard VPN and can implement both client-server and site to site VPN with WireGuard free VPN server. In my previous article, I discussed [...]

    READ MORE »

  • »

    MikroTik Site to Site SSTP VPN Setup with RouterOS Client |   May 14, 2020

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]

    READ MORE »

  • »

    DNS Server Configuration on CentOS 7 (Caching DNS with BIND) |   June 24, 2019

    DNS (Domain Name System) Server is an essential part to any computer network. Today web communication cannot imagine without DNS Server. DNS is a client server protocol where DNS Client requests for the domain name resolution and DNS Server response on it. Every network should have a DNS Server because local DNS Server improves network performance by caching DNS information and serving DNS request locally. DNS Server can be configured either Windows or Linux operating system. In this article, I [...]

    READ MORE »

  • »

    GNS3 Installation and Configuration Step by Step in Windows |   September 14, 2018

    GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]

    READ MORE »

  • »

    MikroTik Router First Time Startup and Setup using WebFig |   April 17, 2018

    I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]

    READ MORE »

  • »

    MikroTik Site to Site OpenVPN Server Setup (RouterOS Client) |   April 9, 2018

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN Server uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data [...]

    READ MORE »

  • »

    Mikrotik Router Basic Configuration Using Winbox |   August 24, 2015

    MikroTik is one of the most popular routers. MikroTik Router has a lot of networking services that help to build a stable and smooth network so easily. It is said that any ISP Company or any Enterprise Office cannot go a single day without MikroTik Router. So, system administrators who are not using MikroTik Router yet, they will soon start using MikroTik Router, I think. As a system administrator, I am also using MikroTik Router about 5 years in my network [...]

    READ MORE »