Windows System Restore Point
Most Relevant Content
Create System Restore Point in Windows OS
System Restore utility in windows operating system helps a windows user to take one or more snapshots of his/her windows system when windows operating system is working well. If any system crash occurs in future due to virus attack or critical system update or any unwanted program, the system can be reverted to its previous snapshot when windows OS was working well. So, System Restore utility in windows operating system is a very helpful service for windows users to protect his/her system from fully dead. But you have to configure system restore in windows operating system before getting this advantage. So, if you are a windows user and you do not configure system restore in your operating system yet, keep reading the rest of this article where I will show you how to configure and create system restore point in windows 7, windows 8 and windows 10 properly. How to Configure System Restore Point in Windows OS By default System Restore is not configured in windows operating system at first installation. But intelligently windows can configure and start system restore in C drive or system drive later if you not configure it manually. So, it is better to configure and [...]
- »
System Restore in Windows 10 | August 30, 2015
Windows is the most popular operating system in the world. No computer user can go a single day without windows operating system. As windows is a popular and mostly used operating system, a lot of viruses or unwanted programs are creating everyday. So, you may face various unusual behavior in your windows operating system due to various virus attack or unwanted programs installation. But windows has integrated a lot features which help to prevent these unwanted programs and keep your [...]
- »
MikroTik Site to Site GRE Tunnel Configuration with IPsec | March 26, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides GRE (Generic Routing Encapsulation) tunnel that is used to create a site to site VPN tunnel. GRE tunneling protocol which can encapsulate a wide variety of protocols creating a virtual point-to-point link was [...]
- »
Setting Google as Default Search Engine | September 30, 2015
Google is one of the most popular search engines to any online user. It is said that no online user cannot go a single day without Google search engine. Google search statistics shows that over 40,000 search queries are processed every second by Google. If you have any query about any subject, just type in Google search box and Google will show you billion of results related to your search query within less than a second. So, usually you will want [...]
- »
MikroTik Dual WAN Load Balancing with Failover using PCC | May 27, 2018
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC [...]
- »
MikroTik DHCP Server Configuration in RouterOS 7 | October 14, 2015
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol. DHCP server automatically provides an Internet Protocol (IP) address and other related information such as subnet mask, default gateway and DNS to DHCP clients. DHCP server and client use UDP port 67 and 68 for communication. In a network, a DHCP client (IP devices such as Desktop, Laptop, Smartphone etc.) requests for an IP lease to DHCP servers and a DHCP server responses allocating IP address and other related IP information [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
MikroTik VRRP Configuration with Load Sharing | November 19, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
MikroTik Router Static DHCP Server Configuration | October 25, 2015
DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and [...]
- »
How to Create Free SSL/TLS Certificate with OpenSSL | July 23, 2021
SSL/TLS certificate is required to encrypt data sent over internet communication. Without encryption, the sent data can be hacked by the middle man attack. SSL/TLS certificate is usually a pair key, public key and private key, solution where data is encrypted with public key and decrypted with private key. In public communication, public key is required to be signed by a CA (certificate authority) but in private communication, there is no need to be signed by any CA. If we [...]
More Similar Content
You May Also Like
