wireless router repeater
Most Relevant Content
How to Use Old Router as Range Extender to Boost WiFi Signal
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender device use old wifi router as range extender mode to boost Wifi signal. The easy method to boost Wi-fi signal coverage without using a range extender device is make wifi router as repeater mode which will extend signal. This post will help you turn old router as a range extender mode to improve wireless signals in the low signal areas. Setup WiFi Router as Range extender Mode To use the router as repeater mode need to access the settings page. To access the router login page use default IP Address router or Make factory reset if forget IP address. Connect Router LAN port to Desktop or Laptop LAN port. Use Static IP Address of the same series in LAN settings [...]
- »
How to Buy a Good WiFi Router for Home or Office | October 12, 2021
You are here because you want to buy a WiFi Router and want to know how to buy a good WiFi Router for your home or office or business. A lot of wireless routers are nowadays available in the market. But before buying a WiFi Router, you should know which one is a good WiFi Router for your need based on some features and specifications of the router. We will now see some key points those should have well understand [...]
- »
MikroTik Wireless AP Configuration with DHCP using Winbox | October 22, 2019
MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]
- »
Static Routing Configuration in MikroTik Router | February 11, 2018
Static Routing is an important topic to any network administrator who works with multiple MikroTik RouterOS and wants to establish communication among Router’s local networks. For example, say a network administrator maintains two MikroTik RouterOS connected with any communication medium and each RouterOS has its own networks and network resources such as servers, printers etc. and he wants that each network and network resources will be accessible from other networks. In this case, static routing configuration between two RouterOS will [...]
- »
phpMyAdmin with NGINX – Installation and Configuration | October 14, 2024
In modern web development, server management is a vital part. Two popular tools that assist in this process are Nginx and phpMyAdmin. Nginx is a high-performance web server, while phpMyAdmin is a widely-used web-based interface for managing MySQL or MariaDB databases. When combined, these tools provide a strong platform for serving dynamic web applications and managing their databases efficiently. What is Nginx? NGINX (pronounced “engine-x”) is an open-source web server that also functions as a reverse proxy, load balancer, and [...]
- »
How to Install MikroTik CHR on VMware Workstation | September 9, 2019
MikroTik is found both RouterBoard where RouterOS and License are prebuilt and RouterOS Application that can be installed on a Physical Machine or Virtual Machine. RouterOS installation on Physical or Virtual Machine has license limitations. Full RouterOS packages cannot be used more than 24 hours without license. So, RouterOS application is not suitable for the Trainee or not suitable to RND purpose. From RouterOS v6.34, MikroTik introduces Cloud Hosted Router (CHR, a new RouterOS version) which has different licensing scheme. [...]
- »
Single IP NAT Strategy in MikroTik RouterOS 7 | September 29, 2015
MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]
- »
CentOS 7 Network Configuration Using nmtui Tool | August 27, 2018
After completing CentOS 7 fresh installation, the first task to a system administrator is to configure its network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7.5 GUI (GNOME Desktop) step by step. If you are a new CentOS 7 user and yet you have not installed CentOS 7.5 on your server machine, feel free to study my previous article and install CentOS 7.5 GNOME Desktop according to that [...]
- »
MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup | November 4, 2025
MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]
- »
MikroTik Dual WAN Load Balancing with Failover using PCC | May 27, 2018
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC [...]
More Similar Content
You May Also Like
