CAPsMAN and AP frequencies
Frequency overlapping makes network performance so poor. So, CAPsMAN channel configuration with proper planning is required to avoid frequency overlapping.
Most Relevant Content
CAPsMAN Channel Planning with Non-Overlapping Frequency
MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to avoid frequency overlapping. Non Overlapping Channels One of my previous articles on WiFi Frequency Band and Channel Width showed the available non overlapping channels in 2.4 GHz Band. There are five non overlapping channel sets on 20MHz channel width in 2.4 GHz frequency but globally 1, 6 and 11 channel set is usually used. The middle frequency of these channels is given in the following table: Channel Number Middle Frequency 1 2412 6 2437 11 2462 In a multi WiFi AP network, the coverage of WiFi AP must be overlap for smooth connection but frequency overlapping must be avoided. So, we have to plan properly for designing a multi WiFi AP network. A possible multi WiFi AP network where there [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
MikroTik Radius Configuration with FreeRADIUS | December 7, 2018
FreeRADIUS is a high performance RADIUS suite that provides authentication, authorization and accounting facility for a large number of network devices including MikroTik Router. Although MikroTik has user manager RADIUS service to provide authentication, authorization and accounting facility but it is not free for customization and not suitable for medium to large organization. On the other hand, freeRADIUS is free for customization according to your organization requirements. But freeRADIUS has to be customized by you. In my previous article, I [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
- »
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) | February 26, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
Managing Disk Partition with the parted Tool in CentOS 7 | March 2, 2019
As a system administrator, sometimes you may require to manage partitions of your CentOS/Red Hat Linux Operating System. Partition management is always a risky task. But there are some useful tools those are so helpful to manage CentOS/Red Hat Linux disk partition easily. In my previous article, I discussed how to manage CentOS/Red Hat 7 HDD partitions with the fdisk utility. The fdisk tool is only eligible to manage MBR partition table. But GPT partition table is now becoming more [...]
- »
How to Properly Downgrade MikroTik RouterOS and Firmware | October 2, 2019
MikroTik RouterOS is in constant development and new features or bug fixes are frequently available, sometimes even monthly. So, it is always recommend upgrading MikroTik RouterOS to a latest and stable version before beginning any configuration. But sometimes you may face that the upgraded version is not working properly according to your demand or you may upgrade to a new version that you don’t want. In this case, you should come back to your workable RouterOS version and firmware. Upgrading RouterOS [...]
- »
MikroTik Winbox 4: New, Fast and Simple RouterOS GUI | September 16, 2024
MikroTik Winbox 4 is a new era of MikroTik network management. Winbox 4 is a new, fast and simple RouterOS GUI. Winbox 4 has a modern and intuitive Graphical User Interface which is preferred and loved by the MikroTik network engineer to manage RouterOS. MikroTik Winbox 4 is now available for download and can be download for Windows, Linux and macOS. Winbox 4 has new features which was absent in previous Winbox version. In this article, we will see how [...]
- »
MikroTik Hotspot HTTPS Redirect and HTTPS Login Setup | May 24, 2020
MikroTik Hotspot is one of the most popular services in MikroTik Router. It is a policy to authorize network clients before to access local network resources as well as public network resources through MikroTik Router. In my previous article I discussed MikroTik Hotspot Configuration using Winbox. But default MikroTik Hotspot configuration faces HTTPS Redirect and HTTPS Login issues. To solve these issues, MikroTik Hotspot HTTPS configuration is required. So, in this article I will discuss how to configure MikroTik Hotspot [...]
More Similar Content
You May Also Like
