centos nameserver

Most Relevant Content

  • DNS Server Configuration on CentOS 7 (Caching DNS with BIND)

    DNS (Domain Name System) Server is an essential part to any computer network. Today web communication cannot imagine without DNS Server. DNS is a client server protocol where DNS Client requests for the domain name resolution and DNS Server response on it. Every network should have a DNS Server because local DNS Server improves network performance by caching DNS information and serving DNS request locally. DNS Server can be configured either Windows or Linux operating system. In this article, I will discuss how to configure a caching DNS Server on CentOS 7/ RedHat 7 Linux with BIND9 Service. Domain Name System (DNS) and How It Works Communication between a workstation (PC) and a Server are always done by IP address. So, to get any information from any Web Server, you have to remember the IP address of that Server. But remembering a huge number of public IP addresses is almost impossible for the human being. To solve this issue, DNS technique is introduced in computer networking. The DNS technique can be best compared to a phone book where a user finds a phone number listed by the easier-to-remember name. So, the DNS can be defined as a mapper between human [...]

    READ MORE »

  • More Similar Content

  • »

    How to Add New Domains to BIND DNS Server |   July 5, 2019

    DNS (Domain Name System) Server is an essential part to any computer network. So, it is always suggest keeping a DNS Server in every network. How to configure a DNS Server with BIND package was discussed in my previous article. A common question among the fresher admins of BIND DNS is how to add a new domain to BIND DNS Server. For this, this article is designed to discuss the proper way to add multiple domains to BIND DNS Server. [...]

    READ MORE »

  • You May Also Like

  • »

    User Management in Linux (Red Hat/CentOS) |   September 28, 2017

    User management is an important part of Linux (especially Red Hat Enterprise Linux) system administration. Linux users can be administrated using user or group administration GUI (Graphical User Interface) tool as well as through Red Hat/CentOS Linux command prompt. But I will always suggest you to do command line user administration as much as possible because in production GUI will not be provided always. Many people who are learning Linux administration do not know all features of user administration command [...]

    READ MORE »

  • »

    MikroTik Dual WAN PCC Load Balancing with PPPoE Server |   July 5, 2018

    Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]

    READ MORE »

  • »

    MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) |   February 26, 2018

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]

    READ MORE »

  • »

    Apache2 Web Server HTTPS Configuration on Ubuntu Server |   August 15, 2021

    Data transmission between web server and web client over port 80 (HTTP) is not encrypted. So, any middle man between web server and web client can view transmitted data and can steal secret information. To overcome this limitation, HTTPS Protocol over port 443 has been introduced. HTTPS is a secure web server that is configured with SSL/TLS certificate. TLS (Transport Layer Security) and its predecessor SSL (Secure Sockets Layer) are web protocols used to wrap normal traffic in a protected, [...]

    READ MORE »

  • »

    OpenVPN Configuration over Port 443 on Ubuntu Linux |   June 20, 2022

    OpenVPN provides a secure and encrypted VPN tunnel across public network. Unlike PPTP and L2TP VPN Services which can be blocked, OpenVPN can highly be customized and even can be run over so popular TCP Port 443. So, OpenVPN cannot easily be blocked. OpenVPN uses SSL/TLS Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across public network. OpenVPN Server can easily install on Ubuntu Server. Installing OpenVPN Server on Ubuntu Server, we can connect Windows, [...]

    READ MORE »

  • »

    MikroTik User Manager RADIUS Installation on RouterOS 7 |   July 5, 2022

    The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]

    READ MORE »

  • »

    MikroTik Router First Time Startup and Setup using WebFig |   April 17, 2018

    I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]

    READ MORE »

  • »

    Ubuntu Web Server Configuration with phpMyAdmin (LAMP Stack) |   July 12, 2021

    Ubuntu Server is one of the most popular open source operating systems that can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server with LVM partition. I also discussed how to assign static IP address on Ubuntu Server interface with Netplan network management tool. Ubuntu web server is a popular service because web developers usually use Ubuntu Server for their development project. Besides development project, Ubuntu web server can also be [...]

    READ MORE »