eoip tunnel to connect lans across internet

Most Relevant Content

  • MikroTik Site to Site EoIP Tunnel with IPsec

    VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) tunnel that is used to create a site to site VPN. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top of an IP connection. EoIP adds an outer header mentioning the entry point of the tunnel (SourceIP) and the exit point of the tunnel (DestinationIP) but the inner packet is kept unmodified. EoIP tunnel only encapsulates IP packets but does not provide authentication and encryption. EoIP tunnel with IPsec ensures IP packet encapsulation as well as authentication and encryption. IPsec usage makes your packets secure but it works slowly because of having extra authentication and encryption process. So, my opinion is that if data security is your concern, use EoIP tunnel with IPsec but if data security is not so headache, use only MikroTik EoIP tunnel because it works so faster. The goal of this article is to design an [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik EoIP Tunnel for Bridging LANs over the Internet |   April 22, 2018

    VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) that is used to create a site to site VPN tunnel. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]

    READ MORE »

  • You May Also Like

  • »

    How to Use Old Router as Range Extender to Boost WiFi Signal |   October 7, 2019

    WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender [...]

    READ MORE »

  • »

    MikroTik PCC Load Balancing over Unequal Dual WAN Links |   June 12, 2018

    Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]

    READ MORE »

  • »

    Guest WiFi – How to Setup on MikroTik AP |   April 30, 2024

    Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]

    READ MORE »

  • »

    How to Block a Phone from WiFi Router |   May 8, 2024

    We usually buy a WiFi Router from market and configure SSID and password to access it. We also configure DHCP Server so that whenever a phone or IP device gets connected to this SSID with the password, the device can get an IP address automatically and can get internet access. It is not possible to secure the WiFi Network keeping only the password authentication method. Because the password can be shared by the users or can be hacked easily. So, [...]

    READ MORE »

  • »

    MikroTik Hotspot Login by HTTP CHAP, HTTP PAP and HTTPS |   July 25, 2020

    MikroTik Hotspot uses various types of login methods. Among these login methods HTTP CHAP, HTTP PAP and HTTPS are basic and important login methods. So, a MikroTik system administrator should have proper understanding on Hotspot HTTP CHAP, HTTP PAP and HTTPS login methods. In my previous article I discussed how to configure MikroTik Hotspot using Winbox. In this article I will discuss how to use HTTP CHAP, HTTP PAP and HTTPS login methods properly in MikroTik Hotspot Server. MikroTik Hotspot [...]

    READ MORE »

  • »

    Restrict Internet Access Based on MAC Address in MikroTik |   February 4, 2017

    MikroTik router has a lot of features by which a network administrator can design his network as he likes. As a network administrator, sometimes you may need to allow internet access some specific devices. If other devices try to access internet, they will be rejected by your router. For example, say, you have configured a simple network like below diagram. In this network, you have configured WAN, LAN, Gateway, DNS and NAT. Also you have created queue rules for limiting [...]

    READ MORE »

  • »

    MikroTik PPPoE Setup with Radius Server Prepaid Billing System |   December 23, 2017

    MikroTik PPPoE Server is popularly used in ISP Companies to maintain user connection. Along with MikroTik PPPoE Service it is a better idea to make a prepaid billing system with Radius Server. MikroTik User Manager Radius Server is a user authentication and accounting application that gives the ISP Company ability to manage PPPoE user’s connection with proper bandwidth management as well as their prepaid billing system with scratch card. So, any ISP Company can turn a smart network system with [...]

    READ MORE »

  • »

    MikroTik Load Balancing and Link Redundancy with PBR |   March 31, 2019

    In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]

    READ MORE »