gre tunnel over ipsec
Most Relevant Content
MikroTik Site to Site GRE Tunnel Configuration with IPsec
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides GRE (Generic Routing Encapsulation) tunnel that is used to create a site to site VPN tunnel. GRE tunneling protocol which can encapsulate a wide variety of protocols creating a virtual point-to-point link was originally developed by Cisco. GRE is a stateless tunnel like EoIP and IPIP. That means if the remote end of the tunnel goes down, all traffic that was routed over the tunnels will get blackholed. To solve this problem, RouterOS have added ‘keepalive’ feature for GRE tunnels. By default keepalive is set to 10 seconds and 10 retries. GRE adds an outer header mentioning the entry point of the tunnel (SourceIP) and the exit point of the tunnel (DestinationIP) but the inner packet is kept unmodified. GRE tunnel only encapsulates IP packets but does not provide authentication and encryption. GRE tunnel with IPsec ensures IP packet encapsulation as well as authentication and encryption. IPsec usage makes your packets secure but [...]
- »
6 Best VPN Providers to Consider in 2022 | October 19, 2021
There are many VPN providers on the market. It can be difficult to know which one is best for you, but luckily we have compiled a list of six of the best! Get ready for our top picks. What is a VPN? A VPN, or virtual private network, hides and encodes your internet traffic so that you can surf the web more securely. By doing so, it protects your data from hackers and prying eyes. Think of a VPN as [...]
- »
MikroTik Site to Site EoIP Tunnel with IPsec | March 21, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) tunnel that is used to create a site to site VPN. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]
- »
CentOS 8 Installation with Screenshots (Server with GUI) | November 21, 2020
Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Red Hat Linux is used as enterprise Linux. Red Hat is also known as Red Hat commercial Linux that means Red Hat is a paid service program. CentOS (Community Enterprise Operating System) is another Linux distribution that provides a free and open source, enterprise-class, community-supported server platform functionally compatible with [...]
- »
Ubuntu Server Set Static IP Address with Netplan | July 1, 2021
Ubuntu Server is one of the most popular open source sever operating systems. Ubuntu Server can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server’s latest version (Ubuntu Server 20.04) with LVM. In this article, we are going to see how to assign static IP address in Ubuntu Server with Netplan network management tool. Netplan Since Ubuntu Server 17.10, Netplan is being used as the default network management tool instead of [...]
- »
MikroTik Backup and Restore Configuration using Winbox | July 31, 2018
Backup and Restore feature in MikroTik Router helps to recover router configuration when running router fails to operation due to hardware failure. If you have a backup copy of your failed router and purchase a new MikroTik Router and then upload and restore that backup file, you will get your running network without any hassle. MikroTik Backup file is also useful when you unfortunately forget your admin privilege user password. You can easily recover your forgotten password with backup file [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
CentOS 7 Network Configuration Using nmtui Tool | August 27, 2018
After completing CentOS 7 fresh installation, the first task to a system administrator is to configure its network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7.5 GUI (GNOME Desktop) step by step. If you are a new CentOS 7 user and yet you have not installed CentOS 7.5 on your server machine, feel free to study my previous article and install CentOS 7.5 GNOME Desktop according to that [...]
- »
OpenVPN Client Configuration in Windows 10/11 | June 29, 2022
OpenVPN is an excellent VPN solution for transmitting data securely over public network. Configuring an OpenVPN Server either on MikroTik RouterOS or Ubuntu Server, we can access local servers or devices from remote place using Windows 10/11, Android or MacOS. How to configure OpenVPN Server in Ubuntu Server was discussed in the previous article. In that article, I also discussed how to create a new OpenVPN client (for Windows OS) who will be able to connect the OpenVPN Server. So, [...]
- »
How to Separate MikroTik Hotspot and DHCP IP Pool | October 9, 2020
MikroTik default Hotspot Setup comes with a DHCP Server (which uses same IP Pool of Hotspot Server) to provide IP address and other network information to a connected device. Using this automatic IP address connected device can access Hotspot login page. After successfully login, a one to one NAT IP address is also assigned for the device and this process happens internally in Hotspot Server. User device cannot know this one to one NAT IP assigning. However, Hotspot Server actually [...]
More Similar Content
You May Also Like
