how to configure ipip tunnel

Most Relevant Content

  • MikroTik IPIP Tunnel with IPsec (Site to Site VPN)

    VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate an IP packet in another IP packet, an outer header is added mentioning the entry point of the tunnel (SourceIP) and the exit point of the tunnel (DestinationIP) but the inner packet is kept unmodified. IPIP tunnel only encapsulates IP packets but does not provide authentication and encryption. IPIP tunnel with IPsec ensures IP packet encapsulation as well as authentication and encryption. IPsec usage makes your packets secure but it works slowly because of having extra authentication and encryption process. So, my opinion is that if data security is your concern, use IPIP tunnel with IPsec but if data security is not so headache, use only IPIP tunnel because it works so faster. The goal of this article is to [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik Site to Site GRE Tunnel Configuration with IPsec |   March 26, 2018

    VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides GRE (Generic Routing Encapsulation) tunnel that is used to create a site to site VPN tunnel. GRE tunneling protocol which can encapsulate a wide variety of protocols creating a virtual point-to-point link was [...]

    READ MORE »

  • »

    MikroTik Site to Site EoIP Tunnel with IPsec |   March 21, 2018

    VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) tunnel that is used to create a site to site VPN. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]

    READ MORE »

  • »

    WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS |   August 14, 2022

    VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]

    READ MORE »

  • You May Also Like

  • »

    Securing MikroTik Router with Port Knocking |   March 21, 2021

    MikroTik Port Knocking strategy helps to protect MikroTik Router from hackers and unauthorized access as well as enhances MikroTik RouterOS security.

    READ MORE »

  • »

    MikroTik Router Bandwidth Management |   September 3, 2015

    MikroTik is one of the most popular routers in computer networking. It is said that no office or ISP company cannot go a single day without MikroTik Router. MikroTik Router is also a popular router to a network administrator because MikroTik Router is easily maintainable with graphical user interface software named winbox than other routers. A lot of services are available in MikroTik router to run a network smoothly. Among these services, Bandwidth Management Service is the most popular service in [...]

    READ MORE »

  • »

    CentOS 7.5 Installation Step by Step with GUI (GNOME Desktop) |   August 15, 2018

    Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Red Hat Linux is used as enterprise Linux. Red Hat is also known as Red Hat commercial Linux that means Red Hat is a paid service program. CentOS (Community Enterprise Operating System) is another Linux distribution that provides a free and open source, enterprise-class, community-supported server platform functionally compatible with [...]

    READ MORE »

  • »

    MikroTik VPN Configuration with Site-to-Site PPTP |   February 19, 2018

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik PPTP is a popular client-server VPN service that provides a secure and encrypted link across public network. MikroTik PPTP can be applied in two methods. Connecting remote workstation/client: In this [...]

    READ MORE »

  • »

    MikroTik PPPoE Server with Radius User Authentication |   December 17, 2017

    MikroTik PPPoE Server is popularly used in ISP Companies. Almost all Local ISP Companies use PPPoE service to manage their client’s connection. So, PPPoE Server Configuration places an important role in MikroTik RouterOS. MikroTik PPPoE Server configuration with local user database has been discussed in my previous article that is enough to manage PPPoE users for a single RouterOS. But if you have more than one RouterOS in your network or you need to manage your users remotely and more [...]

    READ MORE »

  • »

    Setting Google as Default Search Engine |   September 30, 2015

    Google is one of the most popular search engines to any online user. It is said that no online user cannot go a single day without Google search engine. Google search statistics shows that over 40,000 search queries are processed every second by Google. If you have any query about any subject, just type in Google search box and Google will show you billion of results related to your search query within less than a second. So, usually you will want [...]

    READ MORE »