increase wifi signal
Most Relevant Content
How to Use Old Router as Range Extender to Boost WiFi Signal
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender device use old wifi router as range extender mode to boost Wifi signal. The easy method to boost Wi-fi signal coverage without using a range extender device is make wifi router as repeater mode which will extend signal. This post will help you turn old router as a range extender mode to improve wireless signals in the low signal areas. Setup WiFi Router as Range extender Mode To use the router as repeater mode need to access the settings page. To access the router login page use default IP Address router or Make factory reset if forget IP address. Connect Router LAN port to Desktop or Laptop LAN port. Use Static IP Address of the same series in LAN settings [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
MikroTik Hotspot Customized Login Template | April 14, 2022
MikroTik Hotspot is a popular service which is used to manage ISP, Hotel, Restaurant, Airport, and Public WiFi. Using billing application like GalaxyRAD with MikroTik Hotspot, a WiFi network can manage professionally. MikroTik Hotspot loads a login page for new user authentication. So, this login page is a vital source for promoting your brands. The default login template provided by MikroTik Hotspot is a simple template which cannot fulfill branding requirements. But it is possible to customize the login template [...]
- »
MikroTik DNS Client and Caching DNS Server Configuration | April 7, 2019
Domain Name Server (DNS) is an essential part in a computer network. Today web communication cannot imagine without DNS. DNS is a client server protocol where DNS Client requests for the domain name resolution and DNS Server response on it. MikroTik Router has both DNS Client and DNS Server features. The DNS Client is used to resolve domain name to IP address from a DNS Server. On the other hand, the DNS Server feature provides domain name resolution for the [...]
- »
MikroTik VLAN Routing Configuration with Manageable Switch | July 11, 2018
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
Firewalld Installation and Configuration in Ubuntu Server | May 5, 2022
Firewalld is an awesome host based firewall management tool for Linux Operating System. Firewalld has developed on Fedora but it is now available for almost all Linux distributions. So, Firewalld can be installed in Ubuntu Server although Ubuntu Server has UFW as the default firewall system. Firewalld is more robust and easy to maintain than UFW, I think. So, I am going to discuss how to install and configure Firewalld in Ubuntu Server. Installing Firewalld in Ubuntu Server By default [...]
- »
How to Install VMware ESXi VMvisor on VMware Workstation | December 28, 2020
There is no doubt that VMware vSphere is the pioneer in virtualization world. Day by day IT infrastructure is converting to virtualization where VMware vSphere is providing more features than any other virtualization software. VMware ESXi is the foundation of VMware vSphere. VMware ESXi is a bare metal hypervisor. So, a physical server is required to install VMware ESXi. Physical servers are usually costly and beginners or researchers cannot always arrange such a high priced physical server to install ESXi [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
- »
MikroTik UserMan RADIUS Server Customers, Users and Routers | November 13, 2017
MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage MikroTik RouterOS user, PPP user and Hotspot user so smoothly. There are two methods to install MikroTik User Manager RADIUS Server in your network. You can install User Manager Package either on a physical RouterOS or on a dedicated Server Machine or on a Personal Computer where RouterOS is running. How to install and configure User [...]
More Similar Content
You May Also Like
