mikrotik capsman configuration
Most Relevant Content
MikroTik CAPsMAN and CAP Basic Configuration using Winbox
MikroTik CAPsMAN (Controlled Access Point system Manager) is a centralized Access Point management application provided by MikroTik. MikroTik introduces CAPsMAN from RouterOS v6.11 with CAPsMAN v1 and from RouterOS v6.22rc7 CAPsMAN v2 is running. If you have multiple MikroTik CAPs (Controlled Access Point) in your organization, CAPsMAN provides an easy way to maintain client data as well as CAPs configuration centrally. In my previous article, I discussed how to configure MikroTik Wireless Router as an Access Point. In this article, I will discuss how to do configure MikroTik CAPsMAN basic configuration with a Controlled Access Point (CAP). Network Diagram For a simple MikroTik CAPsMAN configuration, I am following the below network diagram. In this network diagram, MikroTik RouterBOARD 1100 AHX2 is working as a CAPsMAN but it is not a wireless router because CAPsMAN does not require being a wireless router but require a powerful hardware that can control multiple CAPs and client data. Another MikroTik Wireless Router (RB941-2nd) is working as a CAP which will be controlled by the CAPsMAN. After configuring CAPsMAN, SSID (MikroTik CAP) will be shown by the CAP and client will be able to connect providing valid password. MikroTik CAPsMAN Configuration with CAP Wireless Router [...]
- »
CAPsMAN Channel Planning with Non-Overlapping Frequency | March 16, 2020
MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
How to Install Extra Packages in MikroTik RouterOS | October 10, 2019
MikroTik RouterOS does not always include all the packages those are developed by MikroTik team. So, sometimes you may find that some packages are missing in your RouterOS such as NTP package, DUDE package, Wireless package, CAPsMAN package and so on. Specially, user manager package which is totally a separate MikroTik RADIUS package used to manage user authentication, authorization and accounting is always missing. Also upgrading RouterOS or downgrading RouterOS you may find that some packages are missing there. So, [...]
- »
MikroTik Port Forwarding using Winbox | July 23, 2018
MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]
- »
MikroTik Hardware Redundancy with VRRP | October 8, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
MikroTik Router Web Proxy Configuration | August 28, 2016
A Proxy Server is usually placed between users and the internet so that the proxy server can track the activities of any user. Formerly, a proxy server was mainly used for caching the static content of any web server because the internet speed was too slow. So, users would get high speed for browsing as if they were browsing a local server. But nowadays the internet bandwidth has increased. So, the proxy server is usually not used for web caching [...]
- »
MikroTik Blocking Websites with TLS Host Firewall Matcher | April 29, 2019
Most of the websites now use https and blocking https websites is so much harder with the MikroTik RouterOS version less than 6.41. But from RouterOS v6.41, MikroTik Firewall introduces a new property named TLS Host that is capable to match https websites so easily. So, blocking https websites like Facebook, YouTube etc. can be easily done with MikroTik Router if RouterOS version is greater than 6.41. In my previous article, I discussed how to block websites with MikroTik Router [...]
- »
What Are the 7 Layers of OSI Model and How Do They Work | October 5, 2021
The OSI Model stands for Open Systems Interconnection Model, a conceptualized framework used to describe the seven layers of a telecommunication system or network. It was established as an international standard in the year 1984 by the International Organization for Standardization. This model helps visualize how networks operate and is still used today to figure out and solve network problems, such as by a web development company. In this article, we will talk about the 7 layers of the OSI [...]
- »
Linux Text Editor | September 7, 2017
Everything is file in Linux operating system. So, anyone who wants to work with Linux operating system (specially, Red Hat or CentOS) must learn how to edit files in Linux operating system. Because, it is always prefer to avoid graphical user interface (GUI) for changing system configuration parameters in Linux operating system unlike Windows operating system. You should be expert enough to edit any file in Red hat Linux operating system otherwise you will face a lot of difficulty to [...]
More Similar Content
You May Also Like
