mikrotik capsman control channel width
Frequency overlapping makes network performance so poor. So, CAPsMAN channel configuration with proper planning is required to avoid frequency overlapping.
Most Relevant Content
CAPsMAN Channel Planning with Non-Overlapping Frequency
MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to avoid frequency overlapping. Non Overlapping Channels One of my previous articles on WiFi Frequency Band and Channel Width showed the available non overlapping channels in 2.4 GHz Band. There are five non overlapping channel sets on 20MHz channel width in 2.4 GHz frequency but globally 1, 6 and 11 channel set is usually used. The middle frequency of these channels is given in the following table: Channel Number Middle Frequency 1 2412 6 2437 11 2462 In a multi WiFi AP network, the coverage of WiFi AP must be overlap for smooth connection but frequency overlapping must be avoided. So, we have to plan properly for designing a multi WiFi AP network. A possible multi WiFi AP network where there [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
How to Block VPN Access with MikroTik Router | May 14, 2019
Sometimes system administrators create firewall rule to block unwanted websites. But VPN apps break these firewall rules and allow access to unwanted websites. For example, if Facebook is blocked with MikroTik Firewall and any expert user installs and enables VPN apps (such as OpenVPN, Hotspot Shield, ProtonVPN, NordVPN, PureVPN etc.), he can easily get access to Facebook. So, system administrators should also block popular VPN apps so that user cannot use those VPN servers. Blocking VPN apps is not so [...]
- »
FreeRADIUS Installation and Basic Configuration on CentOS 7 | November 28, 2018
FreeRADIUS is a modular, high performance and highly customizable open source RADIUS server. Anyone can use FreeRADIUS without any charge and can customize his RADIUS server according to his organizational requirements. In my previous article, I discussed how to install and configure user manager RADIUS server developed by MikroTik. The main disadvantage of user manager RADIUS server is ‘it is not customizable and not suitable for medium or large organization’. On the other hand, FreeRADIUS is giving facility to customize [...]
- »
MikroTik Dual WAN Load Balancing with Failover using PCC | May 27, 2018
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC [...]
- »
Enable F8 Menu to Enter Safe Mode in Windows 8 & 10 | August 27, 2015
Windows is the most popular operating system in the world. No computer user can go a single day without windows operating system. As windows is a popular operating system, it has a lot of viruses also. But windows provides various tools for removing these viruses. For removing any unwanted program, windows safe mode is a best option. A popular way to open windows safe mode is windows Advanced Boot Options. Advanced Boot Options provides different run levels for windows users so [...]
- »
CentOS 8 Networking Configuration Using Cockpit Web Console | January 11, 2021
The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]
- »
How to Create Gmail Account Successfully | August 17, 2015
Email is the heart of any business communication today. Not only enterprise companies but also our personal life’s activities are mostly depended on email. So, every person should have an email account today. There are many online companies (such as Gmail, Yahoo and Hotmail) who are providing free email services for any online users. Among these online companies, Gmail is the most popular free email service by Google with 15 GB free storage facility. Gmail has huge features to maintain [...]
- »
Block Internet Access at a Certain Time in MikroTik RouterOS | August 1, 2024
We often find how to block or allow internet access at a certain time in our LAN network specially in WiFi network. Time based internet access is so useful for controlling Kids internet in any family or managing stuff internet accessibility in any office or other network. MikroTik RouterOS offers a feature named Kid Control to block internet access at a certain time. This feature is so useful for the parents or network engineers who want to block internet access [...]
- »
Ubuntu Server Set Static IP Address with Netplan | July 1, 2021
Ubuntu Server is one of the most popular open source sever operating systems. Ubuntu Server can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server’s latest version (Ubuntu Server 20.04) with LVM. In this article, we are going to see how to assign static IP address in Ubuntu Server with Netplan network management tool. Netplan Since Ubuntu Server 17.10, Netplan is being used as the default network management tool instead of [...]
More Similar Content
You May Also Like
