mikrotik capsman control channel width

Frequency overlapping makes network performance so poor. So, CAPsMAN channel configuration with proper planning is required to avoid frequency overlapping.

Most Relevant Content

  • CAPsMAN Channel Planning with Non-Overlapping Frequency

    MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to avoid frequency overlapping. Non Overlapping Channels One of my previous articles on WiFi Frequency Band and Channel Width showed the available non overlapping channels in 2.4 GHz Band. There are five non overlapping channel sets on 20MHz channel width in 2.4 GHz frequency but globally 1, 6 and 11 channel set is usually used.  The middle frequency of these channels is given in the following table: Channel Number Middle Frequency 1 2412 6 2437 11 2462 In a multi WiFi AP network, the coverage of WiFi AP must be overlap for smooth connection but frequency overlapping must be avoided. So, we have to plan properly for designing a multi WiFi AP network. A possible multi WiFi AP network where there [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik WiFi Frequency Band and Channel Width Explanation |   January 10, 2020

    MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band.  2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]

    READ MORE »

  • You May Also Like

  • »

    IP Based Virtual Hosting on CentOS 7 with Apache Server |   July 18, 2019

    Virtual Hosting is a method of hosting multiple domains on single web server. If you have multiple domains (such as domain1.com, domain2.com and so on) and want to host on single web server, Virtual Web Hosting is your right choice. Apache web server provides an easy way to manage Virtual Hosting. Virtual Hosting can be either Name Based or IP Based. In Name Based Virtual Hosting, multiple domains can be hosted on single IP address. On the other hand, in [...]

    READ MORE »

  • »

    User Management in Linux (Red Hat/CentOS) |   September 28, 2017

    User management is an important part of Linux (especially Red Hat Enterprise Linux) system administration. Linux users can be administrated using user or group administration GUI (Graphical User Interface) tool as well as through Red Hat/CentOS Linux command prompt. But I will always suggest you to do command line user administration as much as possible because in production GUI will not be provided always. Many people who are learning Linux administration do not know all features of user administration command [...]

    READ MORE »

  • »

    MikroTik Router Static DHCP Server Configuration |   October 25, 2015

    DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and [...]

    READ MORE »

  • »

    MikroTik Port Forwarding using Winbox |   July 23, 2018

    MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]

    READ MORE »

  • »

    How to Block MAC Address in MikroTik RouterOS 7 |   July 11, 2024

    MikroTik RouterOS 7 by default allows any MAC address to get internet connection through it. But we may need to block some MAC addresses sometimes. There are three methods to block MAC address in MikroTik RouterOS 7 – Blocking MAC Address using Bridge Filter Rule. Blocking MAC Address using Firewall Filter Rule and Blocking MAC Address from DHCP Lease. We can use any of these methods if we want to block MAC Address in MikroTik Router. In this article, we [...]

    READ MORE »

  • »

    6 Best VPN Providers to Consider in 2022 |   October 19, 2021

    There are many VPN providers on the market. It can be difficult to know which one is best for you, but luckily we have compiled a list of six of the best! Get ready for our top picks. What is a VPN? A VPN, or virtual private network, hides and encodes your internet traffic so that you can surf the web more securely. By doing so, it protects your data from hackers and prying eyes. Think of a VPN as [...]

    READ MORE »

  • »

    How to Block Free Proxy Access with MikroTik Router |   May 21, 2019

    Proxy Server is an alternative to VPN that breaks blocking firewall of a network. If any user uses free web proxy server with web browser, the web request is processed by the proxy server. So, blocking firewall rule is not applied on the proxy enabled PC. For this, system administrators should be careful enough to block free proxy servers along with blocking VPN access. In my previous article, I discussed how to block VPN access with MikroTik Firewall. In this [...]

    READ MORE »

  • »

    What Are the 7 Layers of OSI Model and How Do They Work |   October 5, 2021

    The OSI Model stands for Open Systems Interconnection Model, a conceptualized framework used to describe the seven layers of a telecommunication system or network. It was established as an international standard in the year 1984 by the International Organization for Standardization. This model helps visualize how networks operate and is still used today to figure out and solve network problems, such as by a web development company. In this article, we will talk about the 7 layers of the OSI [...]

    READ MORE »