mikrotik initial configuration with webfig
Most Relevant Content
MikroTik Router First Time Startup and Setup using WebFig
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods to startup and configure a new MikroTik Router. MikroTik First Time Startup and Configuration using Winbox: Winbox configuration utility is able to connect to the MikroTik Router via MAC address or IP address. Winbox is a graphical utility. So, it can be helpful for a new MikroTik user as well as for those users who like to configure RouterOS with Graphical Window. MikroTik First Time Startup and Configuration using WebFig: WebFig is a web configuration utility for MikroTik Router. Those who like to configure MikroTik Router with web Interface can use WebFig utility. It has almost the same configuration functionality as Winbox. MikroTik First Time Startup and Configuration using CLI: Command Line Interface (CLI) utility gives facility to configure MikroTik [...]
- »
MikroTik PCC Load Balancing over Unequal Dual WAN Links | June 12, 2018
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]
- »
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) | February 26, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]
- »
MikroTik RouterOS User Authentication via RADIUS Server | November 19, 2017
MikroTik RouterOS has a strong local user database that is enough to manage a single MikroTik RouterOS user. But if your network has more than one MikroTik Routers, it is always better to use a RADIUS server to manage RouterOS user centrally. MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage not only RouterOS users but also PPP, Hotspot, DHCP and Wireless users. How to [...]
- »
Web Server Configuration in Linux with Apache, MariaDB and PHP | January 2, 2018
Web Server is one of the most important and most used servers today. Without web server internet cannot imagine. Even, the article you are reading is also served by a web server. So, having web server configuration knowledge is beneficial for you, I think. A web server is responsible to serve HTTP (Hypertext Transfer Protocol) contents such as text, image, audio, video etc. to its clients. A lot of web servers are present today such as Apache, IIS, Nginx and [...]
- »
CentOS 7.5 Installation with GUI and LVM Partition | March 7, 2019
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning [...]
- »
LVM Management in CentOS/Red Hat 7 Linux | March 15, 2019
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]
- »
Computer Network Topology Outline | September 12, 2017
The first thing that has to study about a network is its physical shape or design layout. It will be extremely important when a wiring scheme and design are selected for a new network installation. Actually Network Topology refers to physical shape or design layout of a network. Network topology determines how different nodes in a network are connected and how these nodes communicate to each other. Types of Computer Network Topology Network really has two shapes or two types [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Hotspot Setup with Radius Server (User Manager) | January 6, 2018
Hotspot is one of the most popular services in MikroTik Router. It is popularly used in Hotel and Restaurant, Railway Station or Airport, School or University Campus and so on. Even ISP network and office network also use MikroTik Hotspot for authenticating network clients/users. Hotspot user can be managed with Hotspot’s local user database or with a Radius Server. Radius Server gives facility to manage Hotspot user’s bandwidth and accounting easily and centrally. So, Hotspot setup with Radius Server can [...]
You May Also Like
