mikrotik l2tp vpn setup

Most Relevant Content

  • MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client)

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. The goal of this article is to connect a remote client operating system using [...]

    READ MORE »

  • More Similar Content

  • »

    WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS |   August 14, 2022

    VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]

    READ MORE »

  • You May Also Like

  • »

    How to Assign Static IP Address in Windows OS |   September 16, 2015

    Communication between one computer to another computer or server is established with IP addresses. Without IP address no communication is possible in computer network. An Internet Protocol (IP) Address is a numerical value or label assigned to each electronic device (e.g., computer, smartphone and printer) which uses Internet Protocol for communication. IP can be assigned both dynamically and statically on a IP devices. Dynamic IP is assigned by a DHCP server. If a DHCP server is present in a network, [...]

    READ MORE »

  • »

    MikroTik OpenVPN Configuration on TCP Port 443 with Windows OS |   April 6, 2020

    MikroTik OpenVPN is an amazing VPN solution. IT provides a secure and encrypted VPN tunnel across public network. Unlike PPTP and L2TP VPN Services which are poorly designed and can easily be blocked, OpenVPN can highly be customized and even can be run on so popular TCP Port 443. So, OpenVPN cannot easily be blocked. OpenVPN uses SSL/TLS Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across public network. OpenVPN is a site to site [...]

    READ MORE »

  • »

    Restrict Internet Access Based on MAC Address in MikroTik |   February 4, 2017

    MikroTik router has a lot of features by which a network administrator can design his network as he likes. As a network administrator, sometimes you may need to allow internet access some specific devices. If other devices try to access internet, they will be rejected by your router. For example, say, you have configured a simple network like below diagram. In this network, you have configured WAN, LAN, Gateway, DNS and NAT. Also you have created queue rules for limiting [...]

    READ MORE »

  • »

    MikroTik EoIP Tunnel for Bridging LANs over the Internet |   April 22, 2018

    VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) that is used to create a site to site VPN tunnel. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]

    READ MORE »

  • »

    Guest WiFi – How to Setup on MikroTik AP |   April 30, 2024

    Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]

    READ MORE »

  • »

    How to Block WiFi Access although Password is Known |   April 23, 2024

    We usually get internet connection from any ISP and buy any WiFi Router and then configure wireless/AP with password and configure DHCP Server to get connection from own WiFi devices. We use these WiFi Routers/APs at home, office, workspace or any other public places. Usually, we get connected to our WiFi using our provided WiFi password. Initially there will be no problem to keep your network safe using password authentication. But day by day your password will be known by [...]

    READ MORE »

  • »

    CentOS 7 Partition Management with fdisk Utility |   February 11, 2019

    CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]

    READ MORE »

  • »

    FreeRADIUS Installation and Basic Configuration on CentOS 7 |   November 28, 2018

    FreeRADIUS is a modular, high performance and highly customizable open source RADIUS server. Anyone can use FreeRADIUS without any charge and can customize his RADIUS server according to his organizational requirements. In my previous article, I discussed how to install and configure user manager RADIUS server developed by MikroTik. The main disadvantage of user manager RADIUS server is ‘it is not customizable and not suitable for medium or large organization’. On the other hand, FreeRADIUS is giving facility to customize [...]

    READ MORE »