mikrotik l2tp vpn setup
Most Relevant Content
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client)
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. The goal of this article is to connect a remote client operating system using [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
Getting Started with Red Hat Linux | May 20, 2017
Red Hat Linux is an open source server operating system. Although open source Red Hat is a commercial Linux distribution. So, most of the Linux administrators use CentOS because CentOS is a free and open source, enterprise-class and community-supported server platform as well as it is functionally compatible with Red Hat Enterprise Linux. In my previous article, I showed how to install CentOS 7 core packages in your server machine. Today I will introduce you with Red Hat Linux’s command [...]
- »
CentOS 7 Partition Management with fdisk Utility | February 11, 2019
CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]
- »
Red Hat/CentOS Network Configuration | August 4, 2017
Red Hat/CentOS network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7 fresh installation, you have to first configure your system network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7 core packages successfully on your physical machine. If you are a new CentOS 7 user and yet you have not installed CentOS on your machine, feel free to study [...]
- »
MikroTik PCC Load Balancing over Unequal Dual WAN Links | June 12, 2018
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]
- »
MikroTik Port Forwarding using Winbox | July 23, 2018
MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]
- »
Block Internet Access at a Certain Time in MikroTik RouterOS | August 1, 2024
We often find how to block or allow internet access at a certain time in our LAN network specially in WiFi network. Time based internet access is so useful for controlling Kids internet in any family or managing stuff internet accessibility in any office or other network. MikroTik RouterOS offers a feature named Kid Control to block internet access at a certain time. This feature is so useful for the parents or network engineers who want to block internet access [...]
- »
How to Block Tor Browser with MikroTik Router | June 12, 2019
Tor Browser is an alternative to VPN and Web Proxy that breaks blocking firewall rule. If any user installs and uses Tor Browser, he/she can hide the public IP address of router and can unblock blocked websites applied on a network. So, administrators should block Tor Nodes along with other blocking firewall rule. In my previous article, I discussed how to block VPN and Proxy access with MikroTik Router and in this article I will discuss how to block Tor [...]
- »
How to Block MAC Address in MikroTik RouterOS 7 | July 11, 2024
MikroTik RouterOS 7 by default allows any MAC address to get internet connection through it. But we may need to block some MAC addresses sometimes. There are three methods to block MAC address in MikroTik RouterOS 7 – Blocking MAC Address using Bridge Filter Rule. Blocking MAC Address using Firewall Filter Rule and Blocking MAC Address from DHCP Lease. We can use any of these methods if we want to block MAC Address in MikroTik Router. In this article, we [...]
More Similar Content
You May Also Like
