mikrotik vlan trunk
Most Relevant Content
MikroTik VLAN Routing Configuration with Manageable Switch
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as improves IT efficiency. So, it will be a better plan to implement VLAN in your network. If you have or manage MikroTik Router and manageable switch, VLAN implementation in your network is not so difficult. In this article, I will show how to easily configure inter-VLAN routing with MikroTik Router and manageable switch. Core Devices and IP Information To configure a VLAN network and inter-VLAN routing, I am using a MikroTik RouterBoard 1100 AHX2 (RouterOS v6.38.1) and Level One (GEP-2450) manageable switch. IP information that I am using for VLAN network configuration are given below. WAN IP 192.168.30.2/30 and Gateway IP 192.168.30.1 LAN networks: 10.10.20.0/24, 10.10.30.0/24 and 10.10.40.0/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just for my R&D purpose. [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
Create System Restore Point in Windows OS | August 27, 2015
System Restore utility in windows operating system helps a windows user to take one or more snapshots of his/her windows system when windows operating system is working well. If any system crash occurs in future due to virus attack or critical system update or any unwanted program, the system can be reverted to its previous snapshot when windows OS was working well. So, System Restore utility in windows operating system is a very helpful service for windows users to protect [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
CentOS 8 Networking Configuration Using nmtui Tool | December 14, 2020
The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]
- »
Single IP NAT Strategy in MikroTik RouterOS 7 | September 29, 2015
MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]
- »
MikroTik RADIUS Server (User Manager) Installation | October 28, 2017
RADIUS Server is a centralized user authentication, authorization and accounting application. RADIUS authentication gives the ISP or network administrator ability to manage PPP users, login users and Hotspot users from one server throughout a large network. MikroTik RouterOS has a RADIUS client that is able to authenticate login users, Hotspot users and PPP users through a RADIUS server. MikroTik team also developed a totally separate RADIUS server package named User Manager that can be used to authenticate MikroTik users smoothly. [...]
- »
How to Create Free SSL/TLS Certificate with OpenSSL | July 23, 2021
SSL/TLS certificate is required to encrypt data sent over internet communication. Without encryption, the sent data can be hacked by the middle man attack. SSL/TLS certificate is usually a pair key, public key and private key, solution where data is encrypted with public key and decrypted with private key. In public communication, public key is required to be signed by a CA (certificate authority) but in private communication, there is no need to be signed by any CA. If we [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
More Similar Content
You May Also Like
