pppoe server with pcc load balancing
Most Relevant Content
MikroTik Dual WAN PCC Load Balancing with PPPoE Server
Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how MikroTik PCC work and how to configure a basic MikroTik PCC Load Balancing and Link Redundancy network. In this article I will show how to configure a complete Dual WAN PCC Load Balancing and Link Redundancy network with MikroTik PPPoE Server. Core Devices and IP Information To configure a PCC load balancing and link redundancy network with PPPoE Server, I am using MikroTik RouterOS v6.38.1 which has two ISP connections available. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just for my RND purpose. [...]
- »
MikroTik Site to Site SSTP VPN Setup with RouterOS Client | May 14, 2020
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]
- »
MikroTik Router First Time Startup and Setup using WebFig | April 17, 2018
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]
- »
phpMyAdmin with NGINX – Installation and Configuration | October 14, 2024
In modern web development, server management is a vital part. Two popular tools that assist in this process are Nginx and phpMyAdmin. Nginx is a high-performance web server, while phpMyAdmin is a widely-used web-based interface for managing MySQL or MariaDB databases. When combined, these tools provide a strong platform for serving dynamic web applications and managing their databases efficiently. What is Nginx? NGINX (pronounced “engine-x”) is an open-source web server that also functions as a reverse proxy, load balancer, and [...]
- »
MikroTik SSTP VPN Server Configuration with Windows 10 | April 27, 2020
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]
- »
MikroTik Router Integration and Configuration on GNS3 | September 19, 2018
GNS3 is a network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 can talk a large number of network vendors including MikroTik. MikroTik introduces Cloud Hosted Router (a RouterOS version) that is used to run as virtual machine and a virtual machine can easily be integrated with GNS3. So, network administrators who are fond of MikroTik Router can now configure, test and troubleshoot their MikroTik network [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
Red Hat/CentOS Network Configuration | August 4, 2017
Red Hat/CentOS network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7 fresh installation, you have to first configure your system network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7 core packages successfully on your physical machine. If you are a new CentOS 7 user and yet you have not installed CentOS on your machine, feel free to study [...]
- »
MikroTik OpenVPN Configuration on TCP Port 443 with Windows OS | April 6, 2020
MikroTik OpenVPN is an amazing VPN solution. IT provides a secure and encrypted VPN tunnel across public network. Unlike PPTP and L2TP VPN Services which are poorly designed and can easily be blocked, OpenVPN can highly be customized and even can be run on so popular TCP Port 443. So, OpenVPN cannot easily be blocked. OpenVPN uses SSL/TLS Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across public network. OpenVPN is a site to site [...]
- »
How to Add New Domains to BIND DNS Server | July 5, 2019
DNS (Domain Name System) Server is an essential part to any computer network. So, it is always suggest keeping a DNS Server in every network. How to configure a DNS Server with BIND package was discussed in my previous article. A common question among the fresher admins of BIND DNS is how to add a new domain to BIND DNS Server. For this, this article is designed to discuss the proper way to add multiple domains to BIND DNS Server. [...]
You May Also Like
