qemu mikrotik
Most Relevant Content
MikroTik Router Integration and Configuration on GNS3
GNS3 is a network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 can talk a large number of network vendors including MikroTik. MikroTik introduces Cloud Hosted Router (a RouterOS version) that is used to run as virtual machine and a virtual machine can easily be integrated with GNS3. So, network administrators who are fond of MikroTik Router can now configure, test and troubleshoot their MikroTik network with GNS3 so easily. In my previous article I discussed how to install and configure GNS3 in Windows Operating System and in this article I will show how to integrate and configure MikroTik Router on GNS3 to simulate any MikroTik network. MikroTik Router on GNS3 GNS3 is the best friend for those who are unable to arrange a lot of real devices and fail to configure, test and troubleshoot any complex network with MikroTik Router. GNS3 can now talk with MikroTik Router. So, emulating MikroTik Router on GNS3, a network administrator can easily do R&D and can implement it to production environment. MikroTik Router integration and configuration on GNS3 can be divided into the following three steps. Downloading MikroTik Cloud [...]
- »
How to Block Free Proxy Access with MikroTik Router | May 21, 2019
Proxy Server is an alternative to VPN that breaks blocking firewall of a network. If any user uses free web proxy server with web browser, the web request is processed by the proxy server. So, blocking firewall rule is not applied on the proxy enabled PC. For this, system administrators should be careful enough to block free proxy servers along with blocking VPN access. In my previous article, I discussed how to block VPN access with MikroTik Firewall. In this [...]
- »
Red Hat/CentOS Network Configuration | August 4, 2017
Red Hat/CentOS network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7 fresh installation, you have to first configure your system network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7 core packages successfully on your physical machine. If you are a new CentOS 7 user and yet you have not installed CentOS on your machine, feel free to study [...]
- »
MikroTik Site to Site OpenVPN Server Setup (RouterOS Client) | April 9, 2018
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN Server uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data [...]
- »
Securing MikroTik Router with Port Knocking | March 21, 2021
MikroTik Port Knocking strategy helps to protect MikroTik Router from hackers and unauthorized access as well as enhances MikroTik RouterOS security.
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
Restrict Internet Access Based on MAC Address in MikroTik | February 4, 2017
MikroTik router has a lot of features by which a network administrator can design his network as he likes. As a network administrator, sometimes you may need to allow internet access some specific devices. If other devices try to access internet, they will be rejected by your router. For example, say, you have configured a simple network like below diagram. In this network, you have configured WAN, LAN, Gateway, DNS and NAT. Also you have created queue rules for limiting [...]
- »
Ubuntu Server Set Static IP Address with Netplan | July 1, 2021
Ubuntu Server is one of the most popular open source sever operating systems. Ubuntu Server can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server’s latest version (Ubuntu Server 20.04) with LVM. In this article, we are going to see how to assign static IP address in Ubuntu Server with Netplan network management tool. Netplan Since Ubuntu Server 17.10, Netplan is being used as the default network management tool instead of [...]
- »
How to Mount USB Device in CentOS 7 (NTFS and Linux FS) | February 18, 2019
USB Hard Disk Drive or USB Flash Drive (Pen drive) is a popular external device that can be used to backup data or transfer data from one device to other device. In GUI (Graphical User Interface) Operating System such as Window or GNOME Desktop in Linux can automatically mount USB device and can show data in it if the File System of that device is supported. But all users do not like or always do not have GUI mode of [...]
- »
MikroTik Hotspot Login by HTTP CHAP, HTTP PAP and HTTPS | July 25, 2020
MikroTik Hotspot uses various types of login methods. Among these login methods HTTP CHAP, HTTP PAP and HTTPS are basic and important login methods. So, a MikroTik system administrator should have proper understanding on Hotspot HTTP CHAP, HTTP PAP and HTTPS login methods. In my previous article I discussed how to configure MikroTik Hotspot using Winbox. In this article I will discuss how to use HTTP CHAP, HTTP PAP and HTTPS login methods properly in MikroTik Hotspot Server. MikroTik Hotspot [...]
You May Also Like
