sstp vpn routeros client

MikroTik Site to Site SSTP creates a secure VPN tunnel on TCP port 443. So, virtually SSTP cannot be blocked and data can be sent securely with RouterOS client.

Most Relevant Content

  • MikroTik Site to Site SSTP VPN Setup with RouterOS Client

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS channel, encrypted data passes over SSTP Tunnel. So, there is no chance to steal data by a middle man attacker and data can send and receive across public network safely. MikroTik SSTP Server can be applied in two methods. Connecting from remote workstation/client: In this method, SSTP VPN client software can communicate with MikroTik SSTP VPN Server over Secure VPN tunnel whenever required and can access remote private network as if it was directly connected to that remote private network. Site to Site SSTP VPN: This method is also known as VPN between routers. In this method, an SSTP client supported router always establishes a SSTP VPN tunnel with MikroTik SSTP VPN Server. So, private networks of these two routers [...]

    READ MORE »

  • More Similar Content

  • »

    How to Import SSL Certificate in MikroTik RouterOS |   January 16, 2022

    SSL/TLS Certificate is used to make secure communication between server and clients. MikroTik RouterOS has a lot of services such OVPN, SSTP VPN, HTTPS, Hotspot and so on those use SSL/TLS certificate. It is possible to create self-signed certificate in MikroTik RouterOS but self-signed certificate faces untrusted CA warning. So, it is always better to use trusted CA either freemium or premium.  In my previous article, I discussed how to get a free SSL/TLS certificate from Zero SSL but Zero [...]

    READ MORE »

  • »

    MikroTik SSTP VPN Server Configuration with Windows 10 |   April 27, 2020

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]

    READ MORE »

  • You May Also Like

  • »

    MikroTik Blocking Websites with TLS Host Firewall Matcher |   April 29, 2019

    Most of the websites now use https and blocking https websites is so much harder with the MikroTik RouterOS version less than 6.41. But from RouterOS v6.41, MikroTik Firewall introduces a new property named TLS Host that is capable to match https websites so easily. So, blocking https websites like Facebook, YouTube etc. can be easily done with MikroTik Router if RouterOS version is greater than 6.41. In my previous article, I discussed how to block websites with MikroTik Router [...]

    READ MORE »

  • »

    NGINX Web Server Installation and Configuration in Ubuntu |   September 7, 2024

    NGINX is a feature rich and high-performance software which is mainly used for Web Server. NGINX can also be used as a proxy server, load balancer, mail proxy and HTTP Cache Server. NGINX is a free and open-source software and can be run on Linux, Windows. macOS and other operating systems. NGINX is a single-thread based application. So, it can handle unlimited client requests using asynchronous technique. NGINX processes highly efficient run loops in a single-thread process called workers. Workers accept [...]

    READ MORE »

  • »

    MikroTik Send Browsing Log to Remote Syslog Server |   August 18, 2019

    MikroTik RouterOS is capable of logging various system events as well as user browsing information. Logs can be saved in router’s memory (RAM), disk, file, sent by email or even sent to remote syslog server. Sometimes it may require saving user browsing log by the law. So, a syslog server is an essential part to any network. In this article, I will discuss how to configure MikroTik Router to keep user browsing log and send that log to remote syslog [...]

    READ MORE »

  • »

    Single IP NAT Strategy in MikroTik RouterOS 7 |   September 29, 2015

    MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]

    READ MORE »

  • »

    DHCP Server Configuration in MikroTik RouterOS 7 |   October 14, 2015

    Dynamic Host Configuration Protocol (DHCP) is a client/server protocol. DHCP server automatically provides an Internet Protocol (IP) address and other related information such as subnet mask, default gateway and DNS to DHCP clients. DHCP server and client use UDP port 67 and 68 for communication. In a network, a DHCP client (IP devices such as Desktop, Laptop, Smartphone etc.) requests for an IP lease to DHCP servers and a DHCP server responses allocating IP address and other related IP information [...]

    READ MORE »

  • »

    MikroTik Multiple SSID with Separate LAN and DHCP Server |   October 30, 2019

    One of the most amazing features of MikroTik Wireless Router is creating Multiple SSID (Virtual AP) on a physical wireless interface. So, creating a Guest WiFi AP with separate LAN block, SSID and DHCP Server is so easy using MikroTik WiFi AP Router. In the previous article, I discussed how to configure MikroTik WiFi Access Point on physical wireless interface with DHCP Server using hAP Lite (RB941-2nD) Wireless Router. In this article I will discuss how to configure a Virtual [...]

    READ MORE »

  • »

    ISP Bandwidth Management with MikroTik PCQ |   June 25, 2016

    MikroTik is an excellent router for managing ISP Bandwidth. For this, most of the ISPs are now using MikroTik Router for managing client bandwidth. The service used to manage bandwidth in MikroTik RouterOS is QUEUE. There are various types of queue services in MikroTik Router for managing internet bandwidth. Among these, PCQ can specially be used for maintaining ISP bandwidth. In this article, we will see how to manage ISP Bandwidth with MikroTik PCQ. MikroTik PCQ Service PCQ stands for [...]

    READ MORE »