vpn mikrotik pptp setup
Most Relevant Content
MikroTik VPN Configuration with Site-to-Site PPTP
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik PPTP is a popular client-server VPN service that provides a secure and encrypted link across public network. MikroTik PPTP can be applied in two methods. Connecting remote workstation/client: In this method, a PPTP client supported operating system such as Windows can communicate with MikroTik PPTP server through PPTP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site PPTP: This method is also known as VPN between routers. In this method, a PPTP client supported router always establishes a PPTP tunnel with MikroTik PPTP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. MikroTik PPTP Server configuration for connecting remote workstation has been explained in my previous article. So, in this article I will only show how to configure a Site-to-Site PPTP Tunnel between two MikroTik [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) | February 26, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]
- »
MikroTik VPN Configuration with PPTP (Connecting Remote Client) | August 17, 2016
VPN (Virtual Private Network) is a technology that extends private network across a public network. It enables private network users to send and receive data across public network as if their network devices were directly connected to the private network. There are many VPN services in MikroTik RouterOS 7. Among them, MikroTik PPTP is a mostly used VPN service. It is a client-server VPN technology. So, a user can access server, printer, IP phone and any other network devices of [...]
- »
MikroTik Router First Time Startup and Setup using WebFig | April 17, 2018
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]
- »
Managing Disk Partition with the parted Tool in CentOS 7 | March 2, 2019
As a system administrator, sometimes you may require to manage partitions of your CentOS/Red Hat Linux Operating System. Partition management is always a risky task. But there are some useful tools those are so helpful to manage CentOS/Red Hat Linux disk partition easily. In my previous article, I discussed how to manage CentOS/Red Hat 7 HDD partitions with the fdisk utility. The fdisk tool is only eligible to manage MBR partition table. But GPT partition table is now becoming more [...]
- »
How to Install VMware ESXi VMvisor on VMware Workstation | December 28, 2020
There is no doubt that VMware vSphere is the pioneer in virtualization world. Day by day IT infrastructure is converting to virtualization where VMware vSphere is providing more features than any other virtualization software. VMware ESXi is the foundation of VMware vSphere. VMware ESXi is a bare metal hypervisor. So, a physical server is required to install VMware ESXi. Physical servers are usually costly and beginners or researchers cannot always arrange such a high priced physical server to install ESXi [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
How to Clear Google Chrome History | August 20, 2015
Google Chrome is one of the most popular web browsers to online users. It provides a lot of features which help to use this browser smoothly and securely. Google Chrome history is one of the useful features in Google Chrome which helpfully caches or remembers a lot of browsing information specially username and password or login credential of your important web account when you visit various websites in internet. If you are the only user of your desktop or laptop, [...]
- »
WiFi Station Setup in MikroTik Wireless Router | November 27, 2019
MikroTik Wireless Router is capable of working as a WiFi Client. So, if any ISP provides WiFi connection for their clients, MikroTik Wireless Router can be used to connect to that ISP SSID by configuring wireless station mode. MikroTik WiFi station mode finds available SSID and connects with permitted SSID. This wireless connection can be used as wireless WAN connection and configuring LAN, multiple devices can get internet over this wireless WAN connection. In my previous article, I discussed how [...]
More Similar Content
You May Also Like
