lvcreate

Most Relevant Content

  • LVM Management in CentOS/Red Hat 7 Linux

    LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and install CentOS 7 with LVM partitioning and then continue this article. In this article, I will discuss how to manage LVM partitioning in CentOS/ Red Hat 7 Linux with the command line utility. Basic Components and Architecture of LVM Before going to start LVM management with command line tool, we should have basic knowledge on the basic LVM terms and architecture. The following three terms are the basic components of the LVM partitioning. Physical Volume: The underlying physical storage unit of an LVM is a block device such as a partition of a disk or the whole disk. To use the block device for an LVM logical volume, the device must be initialized as a physical volume (PV). Volume Groups: [...]

    READ MORE »

  • You May Also Like

  • »

    MikroTik Multiple SSID with Separate LAN and DHCP Server |   October 30, 2019

    One of the most amazing features of MikroTik Wireless Router is creating Multiple SSID (Virtual AP) on a physical wireless interface. So, creating a Guest WiFi AP with separate LAN block, SSID and DHCP Server is so easy using MikroTik WiFi AP Router. In the previous article, I discussed how to configure MikroTik WiFi Access Point on physical wireless interface with DHCP Server using hAP Lite (RB941-2nD) Wireless Router. In this article I will discuss how to configure a Virtual [...]

    READ MORE »

  • »

    MikroTik VLAN and Bridge Configuration |   September 19, 2017

    VLAN and Bridge are two useful features in MikroTik Router.  These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]

    READ MORE »

  • »

    MikroTik User Manager RADIUS Installation on RouterOS 7 |   July 5, 2022

    The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]

    READ MORE »

  • »

    MikroTik OpenVPN Setup with Windows Client |   April 2, 2018

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across [...]

    READ MORE »

  • »

    Turn Computer into Wi-Fi Hotspot |   September 17, 2015

    Internet Connection Sharing is an awesome feature in windows operating system. Using this feature, you can turn your computer which has wireless network card integrated into Wi-Fi hotspot and share your internet connection with your friends or family members. Generally, each laptop has a wireless network card integrated by default. So, if you are a laptop user, you can turn your laptop into Wi-Fi hotspot so easily. If you are a Desktop user, you can also turn your desktop as [...]

    READ MORE »

  • »

    Free Online File Storage and File Sharing with Google Drive |   August 19, 2015

    Google Drive is a popular free online file storage and file sharing service by Google. Google Drive provides 15 GB free online storage where anyone can store or backup any kinds of file. That means, you can store your document file, picture, audio, video or any kinds of file into Google Drive and can read, write or download any file when you want. You can also share your stored file with your friends using Google Drive. But you are only [...]

    READ MORE »

  • »

    MikroTik WiFi Frequency Band and Channel Width Explanation |   January 10, 2020

    MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band.  2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]

    READ MORE »

  • »

    MikroTik Router First Time Startup and Setup using WebFig |   April 17, 2018

    I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]

    READ MORE »

  • »

    MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP |   September 24, 2019

    ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]

    READ MORE »