mikrotik cap setup with capsman
Most Relevant Content
MikroTik CAPsMAN and CAP Basic Configuration using Winbox
MikroTik CAPsMAN (Controlled Access Point system Manager) is a centralized Access Point management application provided by MikroTik. MikroTik introduces CAPsMAN from RouterOS v6.11 with CAPsMAN v1 and from RouterOS v6.22rc7 CAPsMAN v2 is running. If you have multiple MikroTik CAPs (Controlled Access Point) in your organization, CAPsMAN provides an easy way to maintain client data as well as CAPs configuration centrally. In my previous article, I discussed how to configure MikroTik Wireless Router as an Access Point. In this article, I will discuss how to do configure MikroTik CAPsMAN basic configuration with a Controlled Access Point (CAP). Network Diagram For a simple MikroTik CAPsMAN configuration, I am following the below network diagram. In this network diagram, MikroTik RouterBOARD 1100 AHX2 is working as a CAPsMAN but it is not a wireless router because CAPsMAN does not require being a wireless router but require a powerful hardware that can control multiple CAPs and client data. Another MikroTik Wireless Router (RB941-2nd) is working as a CAP which will be controlled by the CAPsMAN. After configuring CAPsMAN, SSID (MikroTik CAP) will be shown by the CAP and client will be able to connect providing valid password. MikroTik CAPsMAN Configuration with CAP Wireless Router [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
MikroTik User Manager Installation and Basic Configuration | December 15, 2019
MikroTik User Manager is a RADIUS application developed by MikroTik team and can be used without charge. User Manager is used for authentication, authorization and accounting of MikroTik RouterOS, PPPoE, Hotspot, DHCP and Wireless users. Although User Manager Package is developed by MikroTik it will not be found in RouterOS by default. So, we have to install User Manager Package manually if we wish to use this RADIUS application. User Manager can be installed on MikroTik RouterBOARD, MikroTik CHR or [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
- »
Guest WiFi – How to Setup on MikroTik AP | April 30, 2024
Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]
- »
Hard Disk Partitioning in Windows 7, 8 & 10 | August 26, 2015
Windows is the most popular operating system in the world. Any computer user cannot go a single day without windows operating system. Even, I am writing this article on a windows operating system and you are also reading this article on any windows operating system, I think. Windows provides a lot of features or utilities for its user so that they can maintain their operating system so easily. Disk Management is such a built-in powerful utility in windows operating system which [...]
- »
CentOS 8 Networking Configuration Using Cockpit Web Console | January 11, 2021
The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
Getting Started with Red Hat Linux | May 20, 2017
Red Hat Linux is an open source server operating system. Although open source Red Hat is a commercial Linux distribution. So, most of the Linux administrators use CentOS because CentOS is a free and open source, enterprise-class and community-supported server platform as well as it is functionally compatible with Red Hat Enterprise Linux. In my previous article, I showed how to install CentOS 7 core packages in your server machine. Today I will introduce you with Red Hat Linux’s command [...]
- »
MikroTik Hotspot Login by HTTP CHAP, HTTP PAP and HTTPS | July 25, 2020
MikroTik Hotspot uses various types of login methods. Among these login methods HTTP CHAP, HTTP PAP and HTTPS are basic and important login methods. So, a MikroTik system administrator should have proper understanding on Hotspot HTTP CHAP, HTTP PAP and HTTPS login methods. In my previous article I discussed how to configure MikroTik Hotspot using Winbox. In this article I will discuss how to use HTTP CHAP, HTTP PAP and HTTPS login methods properly in MikroTik Hotspot Server. MikroTik Hotspot [...]
More Similar Content
You May Also Like
