routeros vlan setup

Most Relevant Content

  • VLAN Routing Configuration between MikroTik RouterOS

    VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain their LAN users. Network Diagram To configure VLAN between MikroTik RouterOS, I am following a network diagram like the below image. In this network, ether1 port of Core RouterOS is connected to internet having IP address 192.168.30.2/29. Ether2 port is connected to an Ethernet Hub. A hub is an OSI physical layer device. So, if there is a hub between Routers, then from Layer3 point of view it is the same as an Ethernet cable connection between them. Ether2 has two VLANs (VLAN 10 having IP address 172.22.2.1/30 and VLAN 20 having IP address 172.22.2.5/30). Ether1 port of Client RouterOS1 is connected to the Ethernet Hub. This port has a VLAN interface whose id is 10. So, it is able [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup |   November 4, 2025

    MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]

    READ MORE »

  • »

    Guest WiFi – How to Setup on MikroTik AP |   April 30, 2024

    Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]

    READ MORE »

  • »

    MikroTik VLAN Routing Configuration with Manageable Switch |   July 11, 2018

    A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]

    READ MORE »

  • »

    Troubleshooting Common Issues with Security Cameras in MikroTik Networks |   February 7, 2025

    30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]

    READ MORE »

  • »

    MikroTik Wireless AP Configuration with DHCP using Winbox |   October 22, 2019

    MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]

    READ MORE »

  • You May Also Like

  • »

    Network Bandwidth and Throughput |   February 17, 2017

    Bandwidth and Throughput are two important basic networking terms in computer network. If you wish to be an expert network administrator, you must have better understanding about these two networking terms. As a network user, you should also have better understanding about network bandwidth and throughput so that you can get maximum output from your network service provider. In this article, I will explain about network bandwidth and throughput from very beginning. I hope, this article will enrich your networking [...]

    READ MORE »

  • »

    Mikrotik Router Basic Configuration Using Winbox |   August 24, 2015

    MikroTik is one of the most popular routers. MikroTik Router has a lot of networking services that help to build a stable and smooth network so easily. It is said that any ISP Company or any Enterprise Office cannot go a single day without MikroTik Router. So, system administrators who are not using MikroTik Router yet, they will soon start using MikroTik Router, I think. As a system administrator, I am also using MikroTik Router about 5 years in my network [...]

    READ MORE »

  • »

    Boost Network Performance with MikroTik FastTrack in RouterOS 7 |   October 27, 2025

    Network administrators often face the challenge of balancing speed and stability. MikroTik’s FastTrack feature, introduced in earlier RouterOS versions and optimized in RouterOS 7, is a game-changing solution that dramatically enhances performance by reducing CPU load and improving packet handling efficiency. 🚀 What Is MikroTik FastTrack? FastTrack is a special processing method in RouterOS that allows packets from established and related connections to bypass the standard connection tracking process. In simple terms, once a connection is identified as safe and [...]

    READ MORE »

  • »

    How to Install MikroTik CHR on VMware Workstation |   September 9, 2019

    MikroTik is found both RouterBoard where RouterOS and License are prebuilt and RouterOS Application that can be installed on a Physical Machine or Virtual Machine. RouterOS installation on Physical or Virtual Machine has license limitations. Full RouterOS packages cannot be used more than 24 hours without license. So, RouterOS application is not suitable for the Trainee or not suitable to RND purpose. From RouterOS v6.34, MikroTik introduces Cloud Hosted Router (CHR, a new RouterOS version) which has different licensing scheme. [...]

    READ MORE »