sstp vpn port 443
SSTP creates a secure VPN tunnel on TCP port 443. So, virtually SSTP cannot be blocked and data can be sent securely across public network with Windows client.
Most Relevant Content
MikroTik SSTP VPN Server Configuration with Windows 10
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS channel, encrypted data passes over SSTP Tunnel. So, there is no chance to steal data by a middle man attacker and data can send and receive across public network safely. MikroTik SSTP Server can be applied in two methods. Connecting from remote workstation/client: In this method, SSTP VPN client software can communicate with MikroTik SSTP VPN Server over Secure VPN tunnel whenever required and can access remote private network as if it was directly connected to that remote private network. Site to Site SSTP VPN: This method is also known as VPN between routers. In this method, an SSTP client supported router always establishes a SSTP VPN tunnel with MikroTik SSTP VPN Server. So, private networks of these two routers [...]
- »
MikroTik Site to Site SSTP VPN Setup with RouterOS Client | May 14, 2020
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Hotspot Auto Login by MAC Address | July 1, 2020
Hotspot is an awesome service in MikroTik Router. MikroTik Hotspot is popularly used in ISP, Hotel, Airport, Coffee Shop, Enterprise office and many other organizations. By default MikroTik Hotspot uses HTTP CHAP login method where user must provide username and password to get internet service. Sometimes we may face that some users are not eager to provide username and password to get internet service or we cannot ask some users to put username and password to get internet due to [...]
- »
MikroTik Hotspot with Bandwidth Limitation and Prepaid Billing System | January 14, 2018
Say, you are a network administrator and want to establish a network that will have user bandwidth package management facility with prepaid billing system as well as partner advertisement facility. Then, MikroTik Hotspot Server Configuration with MikroTik User Manager Radius Server will be a wise decision. Because, MikroTik User Manager Radius Server is a user authentication, authorization and accounting application that will give facility to manage user bandwidth package with prepaid billing system. On the other hand, you can easily [...]
- »
Single IP NAT Strategy in MikroTik RouterOS 7 | September 29, 2015
MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]
- »
MikroTik PPPoE Server with Radius User Authentication | December 17, 2017
MikroTik PPPoE Server is popularly used in ISP Companies. Almost all Local ISP Companies use PPPoE service to manage their client’s connection. So, PPPoE Server Configuration places an important role in MikroTik RouterOS. MikroTik PPPoE Server configuration with local user database has been discussed in my previous article that is enough to manage PPPoE users for a single RouterOS. But if you have more than one RouterOS in your network or you need to manage your users remotely and more [...]
- »
How to Install Extra Packages in MikroTik RouterOS | October 10, 2019
MikroTik RouterOS does not always include all the packages those are developed by MikroTik team. So, sometimes you may find that some packages are missing in your RouterOS such as NTP package, DUDE package, Wireless package, CAPsMAN package and so on. Specially, user manager package which is totally a separate MikroTik RADIUS package used to manage user authentication, authorization and accounting is always missing. Also upgrading RouterOS or downgrading RouterOS you may find that some packages are missing there. So, [...]
- »
How to Recover MikroTik User Password | August 9, 2018
MikroTik Wiki and Forum say that there is no way to recover MikroTik user password without losing MikroTik configuration. But if you have an unencrypted configuration file backup taken before, you will be able to recover your user password using MikroTik password recovery tools. How to Backup and Restore MikroTik configuration file manually was discussed in my previous article. I also discussed how to backup MikroTik configuration file automatically via Mail in another article and in this article I will [...]
- »
MikroTik Port Forwarding using Winbox | July 23, 2018
MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]
More Similar Content
You May Also Like
