• CAPsMAN Channel Planning with Non-Overlapping Frequency

    MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to avoid frequency overlapping. Non Overlapping Channels One of my previous articles on WiFi Frequency Band and Channel Width showed the available non overlapping channels in 2.4 GHz Band. There are five non overlapping channel sets on 20MHz channel width in 2.4 GHz frequency but globally 1, 6 and 11 channel set is usually used.  The middle frequency of these channels is given in the following table: Channel Number Middle Frequency 1 2412 6 2437 11 2462 In a multi WiFi AP network, the coverage of WiFi AP must be overlap for smooth connection but frequency overlapping must be avoided. So, we have to plan properly for designing a multi WiFi AP network. A possible multi WiFi AP network where there [...]

    READ MORE »

  • »

    MikroTik CAPsMAN and CAP Basic Configuration using Winbox |   February 20, 2020

    MikroTik CAPsMAN (Controlled Access Point system Manager) is a centralized Access Point management application provided by MikroTik.  MikroTik introduces CAPsMAN from RouterOS v6.11 with CAPsMAN v1 and from RouterOS v6.22rc7 CAPsMAN v2 is running. If you have multiple MikroTik CAPs (Controlled Access Point) in your organization, CAPsMAN provides an easy way to maintain client data as well as CAPs configuration centrally. In my previous article, I discussed how to configure MikroTik Wireless Router as an Access Point. In this article, [...]

    READ MORE »

  • »
  • »

    MikroTik WiFi Frequency Band and Channel Width Explanation |   January 10, 2020

    MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band.  2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]

    READ MORE »

  • »

    MikroTik WiFi MAC Authentication with UserMan RADIUS Server |   December 23, 2019

    MikroTik Wireless Router is popularly used as WiFi AP. MikroTik WiFi AP has a lot of features to tune WiFi network as your requirements. MAC authentication is one the amazing and useful features in MikroTik WiFi. MAC authentication enables filtering MAC address that means no MAC can be able to connect to WiFi AP without authentication.  MAC authentication can be done either local database or RADIUS Server. MAC authentication with RADIUS Server provides facility to manage multiple APs from centralized [...]

    READ MORE »

  • »

    MikroTik User Manager Installation and Basic Configuration |   December 15, 2019

    MikroTik User Manager is a RADIUS application developed by MikroTik team and can be used without charge. User Manager is used for authentication, authorization and accounting of MikroTik RouterOS, PPPoE, Hotspot, DHCP and Wireless users. Although User Manager Package is developed by MikroTik it will not be found in RouterOS by default. So, we have to install User Manager Package manually if we wish to use this RADIUS application. User Manager can be installed on MikroTik RouterBOARD, MikroTik CHR or [...]

    READ MORE »

  • »

    WiFi Station Setup in MikroTik Wireless Router |   November 27, 2019

    MikroTik Wireless Router is capable of working as a WiFi Client.  So, if any ISP provides WiFi connection for their clients, MikroTik Wireless Router can be used to connect to that ISP SSID by configuring wireless station mode. MikroTik WiFi station mode finds available SSID and connects with permitted SSID.  This wireless connection can be used as wireless WAN connection and configuring LAN, multiple devices can get internet over this wireless WAN connection. In my previous article, I discussed how [...]

    READ MORE »

  • »

    MikroTik Multiple SSID with Separate LAN and DHCP Server |   October 30, 2019

    One of the most amazing features of MikroTik Wireless Router is creating Multiple SSID (Virtual AP) on a physical wireless interface. So, creating a Guest WiFi AP with separate LAN block, SSID and DHCP Server is so easy using MikroTik WiFi AP Router. In the previous article, I discussed how to configure MikroTik WiFi Access Point on physical wireless interface with DHCP Server using hAP Lite (RB941-2nD) Wireless Router. In this article I will discuss how to configure a Virtual [...]

    READ MORE »

  • »

    MikroTik Wireless AP Configuration with DHCP using Winbox |   October 22, 2019

    MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]

    READ MORE »

  • »

    How to Install Extra Packages in MikroTik RouterOS |   October 10, 2019

    MikroTik RouterOS does not always include all the packages those are developed by MikroTik team. So, sometimes you may find that some packages are missing in your RouterOS such as NTP package, DUDE package, Wireless package, CAPsMAN package and so on. Specially, user manager package which is totally a separate MikroTik RADIUS package used to manage user authentication, authorization and accounting is always missing. Also upgrading RouterOS or downgrading RouterOS you may find that some packages are missing there. So, [...]

    READ MORE »

  • »

    How to Properly Downgrade MikroTik RouterOS and Firmware |   October 2, 2019

    MikroTik RouterOS is in constant development and new features or bug fixes are frequently available, sometimes even monthly. So, it is always recommend upgrading MikroTik RouterOS to a latest and stable version before beginning any configuration. But sometimes you may face that the upgraded version is not working properly according to your demand or you may upgrade to a new version that you don’t want. In this case, you should come back to your workable RouterOS version and firmware. Upgrading RouterOS [...]

    READ MORE »

1 5 6 7 8 9 19